Selecting A Different Track; Repeat Play Modes - Philips AZ1008 User Manual

Selecting a different track

During playback you can use the
SEARCH buttons to select a particular
track.
• If you have selected a track number in the
stop or pause position, press
PLAY•PAUSE 2; to start playback.
• Press SEARCH § once briefly for the
next track, or press repeatedly until the
desired track number appears in the display.
• Press SEARCH ∞ once briefly to return
to the beginning of a current track.
• Press SEARCH ∞ more than once briefly
for a previous track.
Finding a passage within a track
1 During playback, press and hold down
SEARCH ∞ or §.
• The CD is played at high speed and low
volume.
2 When you recognize the passage you want
release the SEARCH button.
Normal playback resumes.
Note:When searching within a final track and
you reach the end of the last track, the CD
goes to stop mode.

Repeat play modes

REPEAT can be selected or changed
during playback in the following sequence:
REPEAT – plays the current track
continuously
REPEAT ALL – plays the whole CD
continuously
.
IC BA SS
D B B
1 During playback, press REPEAT once or
more until the desired REPEAT mode is
shown.
• You can use SEARCH ∞ or § to skip
tracks during the repeat modes.
• The REPEAT play options can be
combined and used with a program: e.g.
REPEAT ALL
entire CD program.
2 To return to normal playback press
REPEAT until the REPEAT modes are no
longer shown.
• You can also press STOP 9 to quit the
play mode.
CD-Player
.
IC BA SS
D B B
– repeats the
PROGRAM
11