Installing batteries . Position the radio face down on a soft surface. . Remove the catch as shown and lift out the battery cover. 3. Insert x “ D “ size/UM-/LR0 batteries. 4. Replace the battery cover and catch. 5.
Operating your radio - DAB 1. Press the Power button to switch on your radio. If this is the first time the radio is used, scan of the Band III DAB channels will be carried out. If the radio has been used before the last used station will be selected.
Display modes - DAB Your radio has seven display modes:- . Press the Info button to cycle through the various modes. a. Scrolling text Displays scrolling text messages such as artist/track name, phone in number etc. b. Program Type Displays the type of station being listened to e.g. Pop, Classic, News etc. c.
Dynamic Range Control settings - DAB Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment. . Press the Power button to switch on your radio. . Press and hold the Info/Menu button. 3.
Manual Tuning- FM . Press the Power button to switch on your radio. . Press the Band button to select the FM band. Ensure your radio’s wire antenna is fully extended. 3. Press the Tuning Up/Down button. 4. Press either the Tuning Up/Down buttons to tune to a station. The frequency will change in steps of 50kHz. 5.
Bluetooth device can pair or link with your radio. 3) If ‘H205D” shows in your Bluetooth device list but your device cannot connect with it, please delete the item from your list and pair the device with the radio again following the steps described previously.
Playing audio files in Bluetooth mode When you have successfully connected your radio with the chosen Bluetooth device you can start to play your music using the controls on your connected Bluetooth device. . Once playing has started adjust the volume to the required setting using the Volume control on your radio or on your enabled Bluetooth device.
For more information, please contact our Head Office by sending email to info@sangean.com . Press and hold the Info/Menu button to enter the Advanced menu of the current waveband. . Press the Tuning buttons until ‘SYSTEM’ shown on the display. Press the Select button to enter the setting.
Carrying strap Using the supplied carrying strap, you may hang or carry the radio when it’s not used in bathroom. Power requirements Mains via AC adaptor (not supplied) INPUT: 100-240V~ 50/60HZ OUTPUT: DC 5V/600mA Batteries: 2 x UM1 (D size, LR20) Battery Life: Approx.