User Setup Menu - Rice Lake 880 Technical And Service Manual

3.1.3

User Setup Menu

The 880 indicator can be configured using a series of menus accessed through the indicator front panel when the
indicator is in user setup mode or setup mode. Table 3-1 summarizes the functions of the user setup menu.
Menu
AUDIT Audit Trail
SETUP Setup
T&D Time and Date
ACCUM Accumulator
SETPTS Setpoints
TARE Tare
AUDIT SETUP T & D
See
See
Figure 3-7
Figure 3-6
Displayed only
if audit trail
is enabled
TIME
DATE
000000 000000
Figure 3-2.
Displays the legally relevant (LR) firmware version, configuration count and calibration count.
Used to enter setup mode, if audit trail is enabled.
View and change time and date.
View or clear the current accumulator value, if enabled.
Configure setpoint values and ENABLE/DISABLE setpoints. Only configured setpoints will be
available.
View the current tare value.
Table 3-1.
ACCUM SETPTS
See
Figure 3-16
VIEW CLR Y?
000000
ACCUM
Displayed only
if turned on in
Scale Menu
880
Menu Layout
User Menu Function
880
Menu Summary
TARE
000000
Configuration 23