Page 1
Black SD-2010 Model Heat Stress Pantone 534 Blue - 100/80/30/5 Pantone 485 Red - 10/100/100/5 Meter and Pantone 123 Yellow - 0/27/100/ Datalogger Instruction Manual www.actoolsupply.com...
www.actoolsupply.com Table of Contents Features..................... 3 Specifications.................4-5 Instrument.Description..............6 Operating.Instructions..............7-11 Function selection ................7 WBGT Measurement ..............7 WB Measurement ................7 Dew Point Temperature Measurement ........... 8 TG Measurement ................8 Humidity and TA Measurement ............8 Data Hold ..................
www.actoolsupply.com Dew Point Temperature Measurement 1). Turn.on.the.meter.by.pressing.the.Power.Button.. 2). Function.select.to.“dP”..The.upper.Display.will.show.the.Dew.Point. Temperature.value..The.lower.Display.will.show.the.text.“dP”. TG Measurement 1). Turn.on.the.meter.by.pressing.the.Power.Button.. 2). Function.select.to.“tg”..The.upper.Display.will.show.the.TG.value.. The.lower.Display.will.show.the.text.“tg”. Humidity and TA Measurement 1). Turn.on.the.meter.by.pressing.the.Power.Button.. 2). Function.select.to.“rH”..The.upper.Display.will.show.the.Humidity. value..The.lower.Display.will.show.the.TA.value. Data Hold While.taking.a.measurement,.press.the.Hold.Button.once.and.the.mea- sured.value.will.hold.on.the.screen,.and.a.HOLD.symbol.will.appear... Press the.Hold.Button.once.again.will.release.the.data.hold.function.. Data Record (Max., Min. reading) The.data.record.function.records.the.maximum.and.minimum.readings.. Press the.REC.Button.once.to.start.the.Data.Record.function.and.a.“REC”. symbol.will.appear.on.the.display..With.the.“REC”.symbol.on.the.display:.
www.actoolsupply.com Set WBGT Alarm Value 1). When.the.lower.display.shows.“AL”,.use.the.Up.or.Down.Buttons. adjust.the.WBGT.Alarm.value..If.the.WBGT.measurement.is.above. the.alarm.setting,.a.buzzer.will.sound. 2). Press the.Enter.Button.to.save.the.setting.as.the.default..To.exit. “Advanced.Settings”,.press.the.Esc.Button. Setting the Decimal point on the SD Card 1). When.the.lower.display.shows.“dEC”,.use.the.Up.or.Down.Buttons. to.toggle.between.“bASIC”.(“.”.Decimal.Point).or.“Euro”.(“,”.Deci- mal.Point).. 2). After.the.Decimal.point.character.has.been.selected,.press.the. Enter.Button.to.save.the.setting.as.the.default..To.exit.“Advanced. Settings”,.press.the.Esc.Button. Auto power OFF management 1). When.the.lower.display.shows.“PoFF”,.use.the.Up.or.Down.But- tons.to.select.the.value.“yES”.(Enable.Auto.Power.Off).or.“no”. (Disable.Auto.Power.Off. 2). After.selecting.“yES”.or.“no”,.press.the.Enter.Button.to.save.the. setting.as.the.default..To.exit.“Advanced.Settings”,.press.the.Esc. Button.
www.actoolsupply.com Select the Temperature unit to °C or °F 1). When.the.lower.display.shows.“t-CF”,.use.the.Up.or.Down.Buttons. to.select.“C”.(for.°C).or.“F”.(for.°F). 2). After.selecting.“C”.or.“F”,.press.the.Enter.Button.to.save.the.set- ting.as.the.default..To.exit.“Advanced.Settings”,.press.the.Esc. Button. Set sampling time 1). When.the.lower.display.shows.“SP-t”,.use.the.Up.or.Down.Buttons. to.adjust.the.value.to.either.0,.1, 2,.5,.10,.30,60,.120,.300,.600,. 1800,.or.3600.seconds. 2). After.the.Sampling.value.is.selected,.press.the.press.the.Enter.But- ton.to.save.the.setting.as.the.default..To exit.“Advanced.Settings”,. press.the.Esc.Button. SD memory card Format Please Note:.Formatting.the.SD.card.erases.all.data.from.that.SD.card. 1). When.the.lower.display.shows.“Sd.F”,.use.the.Up.or.Down.Buttons. to.select.“yES”.(format.the.SD.card).or.“no”.(do.not.format.the.SD. card). 2). To.format.your.SD.card,.select.“yES”.and.press.the.Enter.Button.. The.Display.will.show.“yES.Enter”,.to.confirm..Press.the.Enter.But- ton.to.confirm.
Need help?
Do you have a question about the SD-2010 and is the answer not in the manual?
Questions and answers