Cd Operation; Loading A Disc; Basic Playback Controls - Philips DCB146 User Manual

CD Operation

IMPORTANT:
The lens of the CD player should never be
touched.

Loading a disc

This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
●
CD-ROM, CD-I, CDV, MP3 CD, VCD, DVD or
computer CDs, however, are not possible.
1
Select CD source.
2
Lift the CD door on the top of
the system to open the CD
compartment.
➜
"OPEN" is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on PULL TO OPEN to close the
CD door.
➜
"READING" is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks is shown.
12

Basic playback controls

To play a disc
●
Press 2; to star t playback.
➜
The current track number and "PLAY" icon
are displayed during disc playback.
To select a different track
● Press TUNING 4 ¢ (or 4 / ¢ on
the remote control ) once or repeatedly until
the desired track number appears in the display.
To find a passage within a track
1
Press and hold down on TUNING 4 ¢
(or 4 / ¢ on the remote control).
➜
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release TUNING 4 ¢ (or 4 / ¢ on
the remote control).
➜
Normal playback continues.
To interrupt playback
●
Press 2; during playback.
➜
The display freezes and "PLAY" icon flashes
when playback is interrupted.
➜
To resume, press 2; again.
To stop playback
● Press 9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: FM, DAB, iPod or
PULL TO OPEN
AUX.
– you select standby.