Nokia OZO camera Manual page 11

Broadcasting over SDI
You can switch from Standby-mode to
Broadcasting either by sliding the power-
button (A) to the outmost right position and
release (as you did for power on) or by using
the controls in the camera-mode panel of the
OZO Remote Application.
Repeat this procedure to return back to
Standby mode.
During Broadcasting a red LED ring around the
Capture-button blinks regularly "once in a
while" to indicate that the Camera is "On the
Air".
To monitor the live image from the Camera
make sure the SDI adapter and cables are
connected to your OZO Remote host
computer.
Use the Capture Settings panel in OZO Remote
to set the exposure.
Oculus Rift DK2 Setup Oculus Rift DK2 Setup
1. Download and install Oculus Runtime for OS X version 0.4.4-beta from:
https://developer.oculus.com/downloads/pc/0.4.4-beta/Oculus_Runtime_for_OS_X/
2. After installing the Runtime connect the Oculus DK2 HDMI and USB cables to your Mac.
3. Having connected the DK2 open the Display settings from the System Preferences (click the
Apple logo in the top-left-corner of your display).
4. Select the Arrangement tab (1) and make sure the "Mirror Displays" (2) checkbox is
unchecked, and the Rift DK2 display is positioned on the right side of the main display (3). The
size of the main display may vary depending on your display resolution.
NOTE: You can have only one main display, and no additional secondary displays connected
when using OZO applications with the Oculus Rift DK2.
Capturing
Press the Capture button to start or stop
capturing to the internal storage.
While capturing to the internal Media Module
the Capture button indicator (C) is
continuously on. Blinking slowly signals "less
than 5 minutes left".
Blinking fast signals "storage is full". These
limits are also reflected in the "Storage" status
group in OZO Remote.
NOTE: To capture on external storage set the
Camera to Broadcasting instead and use the
controls on the external device.