Test Mode - Kenwood KIV-700 Service Manual

■ Key layout
∗ The product can be reset by simultaneously pressing the following three keys: [MENU], [AUD] and [SRC].
SRC
AUD
■ How to transfer into the test mode
Press and hold the [TEL] or [TI] or [PLAY MODE] and [FAV] keys and reset.
∗ Reset can be made also by turning on the head unit power supply.
■ How to clear the test mode
It is required to clear the test mode under any of the following conditions:
Reset
Momentary power down detection
ACC OFF operation
Panel detach operation
■ Initial setting
The source when making the transfer shall be STANDBY source.
All the TFT LCD turns on when it is white.
VOLUME setting shall be 30.
CRSC setting shall be ON. (Do not set up to ON/OFF switching.)
KEY ON BEEP setting shall be ON regardless of destination of the product.
Build-in AUX shall be ON.
DSP shall be BYPASS setting (DSP OFF).
DISPLAY setting shall be Type-A1. (This is the same as the initial setting for the normal mode)
DISPLAY TEXT setting in TUNER source shall be as follows:
K/M type 1st row: Frequency
E type 1st row: PS/Frequency
SOURCE SELECT setting shall be mode 2 (Mode in which the source is switched every time when [SRC] key is pressed
briefl y).
The illumination settings shall be R255, G255, and B255 (white).
AV OUT setting shall be ON.

TEST MODE

MENU DISP
Play/Pause
TEL or TI or PLAY MODE
KIV-700/BT900
SEARCH
MODE
FAV
9