connection
COPYING A CAMCORDER TAPE ONTO A VIDEO TAPE
•
The copying function works only in Player Mode.
•
Connect your camcorder to a VCR using the AV jack to copy the recording from a camcorder tape onto a VCR tape.
1. Insert the tape you want to copy in your camcorder.
2. Press the MODE button to set
Player (
).
3. Insert a new video tape in your VCR.
4. Connect the camcorder to your VCR with
the Audio/Video cable.
•
Connect the Audio/Video cable to the
input jack on your VCR.
•
The yellow jack: Video
•
The white jack: Audio(L)-mono
•
The red jack: Audio(R)
5. Press the Record button on your VCR to
start recording.
6. Play the tape on your camcorder. Please
refer to page 69 to see how to play a tape.
•
if you do not want to copy the screen display, set the "TV Display" to "Off" in the menu.
When Copying is Complete:
Stop recording on your VCR, then move the Joystick down (▼) on your camcorder.
•
If you operate the camcorder while connected to another device, always connect the camcorder to an AC
outlet using the AC power adapter.
•
You can also copy images to other external storage media (such as a DVD Recorder) using this camcorder.
➥
page 18
VCR
Camcorder
AV
DV
MODE
POWER
CHG
Signal flow
Audio/Video Cable
➥
page 32
AV Jack
English _69