Connecting to a TV that has no Audio/Video Input Jacks
•
You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder to your VCR with the Audio/Video cable.
•
The yellow jack: Video
•
The white jack: Audio(L) - mono
•
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Press the MODE button to set Player (
4. Turn on both the TV and VCR.
•
Set the input selector on the VCR to line.
•
Select the channel reserved for your VCR
on the TV set.
5. Play the tape.
Play back the tape
1. Connect a power source.
2. Insert the tape you wish to play back.
3. Press the MODE button to set Player (
4. Move the Joystick ( / ) left or right, fi nd the fi rst position you wish to play back.
5. Press the Joystick.
•
The images you recorded will appear on the TV after a few seconds.
•
If a tape reaches its end while being played back, the tape will rewind automatically.
6. To stop the playback, move the Joystick down (▼).
•
The playback mode (SP/LP) is selected automatically.
•
If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
68_ English
VCR
).
TV
Antenna
).
Camcorder
AV
DV
MODE
POWER
CHG
Signal flow
Audio/Video Cable
AV Jack