Download  Print this page

Advertisement

Table of Contents
advanced recording
RECORDING A PHOTO IMAGE ON A TAPE -TAPE PHOTO RECORDING
Tape photo recording works only in Camera mode. ➥page 18
You can record a photo image on a tape. The photo image is recorded and will take
up a 6~7 second section of tape.
1. Press the MODE button to set Camera (
2. Press the PHOTO button.
"
REC " is displayed on the LCD screen, the photo image is recorded
for about 6~7 seconds.
3. After the photo image has been recorded, the camcorder returns to its previous mode.
Tape Photo Recording takes about six or seven seconds, and
your camcorder returns to the standby mode. During the seven seconds,
you cannot record another photo image.
During the Tape Photo Recording, do not shake your camcorder.
Mosaic-pattern noise may appear on the image.
During the Tape Photo Recording, you can not set the following functions:
- "Visual Effect", "DIS" , "Digital Zoom", "C.Nite", "16:9 Wide"
(After tape photo recording, most functions return to the previous mode.)
Tape Photo Recording does not work in the following situations:
- While recording movie images
- When "C.Nite" is set.
Press PHOTO button on the remote control. Pressing the PHOTO button
on the remote control records the tape photo image with automatic focusing
(SC-D392 only)
).
PHOTO
PO W
ER
CH G
REC
SP
3 SEC
3 SEC
10Sec
60min
16:9 Wide
16BIt
S
No Tape !
1/50
M
29
W
T
C.Nite 1/30
12:00 1.JAN.2008
START/
STOP
DISPLAY
<SC-D392 only>
English _59

Advertisement

Table of Contents

This manual is also suitable for:

Sc-d392

Comments to this Manuals

Symbols: 0
Latest comments: