ATTACHING THE CORE FILTER
To reduce electrical interference, attach the core fi lter to the AC power
adaptor.
•
To attach the core fi lter to power adapter, roll the cable over core
fi lter once.
•
Be careful not to damage the cable when attaching the core fi lter.
INSTALLING THE BUTTON-TYPE BATTERY
Button-type battery installation for the remote control
(SC-D392 only)
1. Pull out the button-type battery holder toward the direction of
the arrow.
2. Position the button-type battery in the button-type battery holder,
with the positive (
3. Reinsert the button-type battery holder.
Precaution regarding the button-type battery
•
There is a danger of explosion if button-type battery is incorrectly replaced. Replace only with the same or
equivalent type.
•
Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.
•
Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk of explosion.
Keep the button-type Battery out of reach of children. Should a battery be swallowed, seek medical
attention immediately.
WARNING
) terminal face up.
Wind once!
AC power adaptor
English _13