Aux/Cdr; Clock; Timer; Selecting External Equipment - Philips FW-D5/21 Service Manual

AUX/CDR

DVD MINI HIFI SYSTEM
STANDBY
ON
FTS TITLE
P1 P2 P3
POWER SAVE
IR SENSOR
VCD • CD
DVD
SEARCH•TUNING
PROG
AXIS
DVD JOG

Selecting External Equipment

If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX/CDR IN terminals,
you can hear the enhanced sound from the
system.
1 Press AUX (CDR) to select the CDR
mode.
™ "CDR" will be displayed.
2 Press AUX (CDR) again to select
external (normal AUX) mode.
™ "AUX" will be displayed.

TIMER

5 Press CLOCK/TIMER again to store the
setting.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
38
PCS 103 813
LEFT CENTER RIGHT
CHAP. FM LW A M W SLEEP DIM TIMER
P4 P5 P6
SURR CHANNEL SURR
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
CD 1 • 2 • 3 BAND CDR
CD TUNER AUX
PRESET ▲
STOP•CLEAR PLAY PAUSE PREV SIDE NEXT
VOLUME

CLOCK/

DIM
TIMER
DVD
DVD
OK
MENU
SOUND JOG
Notes:
– There are two Auxiliary modes:
i. the normal AUX mode.
ii. the CDR mode, where the LINE OUT
of this mini system is muted. You will
not be able to record or listen to the
sound from the LINE OUT.
– You are advised not to listen to and
record from the same source
simultaneously.
– All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a preset
time. It can serve as an alarm to wake
you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCK/TIMER for more
than 2 seconds to select timer mode.
™ "AM 12:00" or "00:00" or the last
timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™ The
starts flashing.
TIMER
™ The selected source is lit while other
available sources are flashing.
2 Press CD or TUNER to select the
desired source.
• Before selecting CD, make sure a CD is
loaded in the CD tray.
3 Press à or á on the system to set
the hour for the timer to start.
4 Press í or ë on the system to set
the minute for the timer to start.
2-16
CLOCK
DVD MINI HIFI SYSTEM
STANDBY
NEWS / T.A. ON
FTS TITLE
P1
POWER SAVE
RDS / CD TEXT
IR SENSOR
VCD • CD
SEARCH•TUNING
DVD JOG
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about seven
seconds.
• Press CLOCK/TIMER briefly.
™ "PM 10:38 or 22:38" (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ "--:--" will be displayed if the
clock is not set.
5 Press CLOCK/TIMER to store the start
time.
™ The timer is now set.
™ The
remains on the display.
TIMER
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or programme. If the CD
trays are empty, TUNER will be selected
instead.
To switch off the TIMER
• Press TIMER on the remote control.
™ The timer is now switched off.
™ The display will show "CANCEL"
and the disappears.
TIMER
To start the TIMER again (for the same
preset time and source)
• Press TIMER on the remote control.
™ The timer is now on.
™ The
appears on the display.
TIMER
LEFT CENTER
CHAP. FM LW A M W SLEEP DIM TIMER
P2 P3 P4 P5 P6
SURR CHANNEL
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
CD 1 • 2 • 3 BAND CDR
DVD CD TUNER AUX
PRESET ▲
STOP•CLEAR PLAY PAUSE PREV SIDE NEXT
VOLUME
CLOCK/
PROG DIM
TIMER
DVD
DVD
AXIS OK
MENU
SOUND JOG
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "AM 12:00" or
"00:00". Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK/TIMER to select clock
mode.
2 Press PROG (on the system only) to
select 12- and 24- hour mode.
™ If 12-hour mode is selected,
"AM 12:00" starts flashing.
™ If 24-hour mode is selected, "00:00"
starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
NEWS / T.A.
RIGHT
SURR
RDS / CD TEXT
37