Ec Declaration Of Conformity - DeVilbiss AGGS-522 Operation Manual

Read and follow all instructions and Safety Precautions before using this
The AGGS-522 is a production spray gun suitable for use with automatic and semi-automatic machines.
The design utilizes high volume low pressure atomization air (HVLP) to reduce overspray and improve coating
efficiency. To handle a wide range of coating materials the material passages are manufactured from high
grade stainless steel. Pressure feed material supply can be re-circulating or direct. A removable spray head
simplifies maintenance and cleaning of material wetted components. The gun is triggered by compressed air
to a single acting cylinder by a remotely positioned 3 way valve (supplied by user).
APPLICATIONS: General purpose solvent based and waterborne coating materials, food and pharmaceutical
processes.
IMPORTANT: These guns are not designed for use with highly corrosive or highly abrasive materials and if
used with such materials it must be expected that the need for thorough cleaning and/or the necessity for
replacement parts will be increased. If there is any doubt regarding the suitability of a specific material, advise
what material is to be used and/or submit a sample for test.
MODELS
The automatic spray gun type AGGS complies to ATEX regulations 94/9/EC, protection level II 2 G X T6
suitable for use in Zones 1 & 2.
For ordering information see chart for the selection of air cap, tip and needle combinations.
EXAMPLE:
Basic part No
Fluid Tip size

EC Declaration of Conformity

We, ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spray gun model AGGS, declare, under our sole responsibility that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the protection
requirements of Council Directive 98/37/EEC relating to Machinery Safety Directive, and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective Systems
intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
ITW Finishing Systems and Products reserve the right to modify equipment specification without prior notice.
Operation Manual
AGGS-522 Automatic Spraygun
Description
AGGS-522 FF H - 13
Fluid Tip Material
H = High grade Stainless Steel
B. Holt, General Manager
30
Important
equipment
Air Cap No
th
June 2003