use. The selection of templates listed depends on the report type selected.
Each template includes patient demographic data, and each Realtime Report also includes alarm
and INOP information. In addition, the templates include:
size for the template chosen,
available sizes depends on the report type selected.
for the template chosen,
the default printer, or choose from the list of printer names defined at the Information Center or
in the monitor's Configuration Mode (for example,
Some settings may be inactive ("grayed-out") in this menu for reports that can only be started in a
Checking Printer Settings
The printer settings for your monitor are defined in Configuration Mode. The printer settings
("grayed-out") in the
To enter the
Printer names for locally-connected printers can be defined in Configuration Mode. You can see
whether a specified printer is centrally or locally connected in the
"Local" is included in the port name, e.g.
If you are using an IntelliVue XDS Application print service, you may see XDS printers in the
menu that also have "Local" or "Remote" in their name. Their names and settings can only be
configured in the XDS Application. Refer to the IntelliVue XDS Application Installation and
Configuration Guide for full details about the configuration possibilities.
and then select the reports template you want the report selected in Step 2 to
: all waves currently visible, in the order they appear on the screen.
: all measured waves.
: all currently measured realtime waves, according to the monitor's priority list.
: all measured HiRes waves.
: the OxyCRG/Neonatal Event Review waves.
: trend information in tabular form.
: trend information in graphic form.
: a single patient event episode.
: an overview of patient events
: a list of all currently set alarm limits.
to set the paper size to be used for the report:
to set the orientation of the report printout:
and choose which printer the print job will be sent to:
setting will be shown.
menu, in the
, indicates centrally-connected printers.
for the active printer are visible but inactive
, that indicates locally-connected printers, and
29 Printing Patient Reports
to use the default
. The list of
to use the default size
is selected as active printer only the