For central recording from the bedside, your monitor must be connected via a network to an
Information Center. You can use either the M1116B 2-Channel Recorder or the standalone M3160A
4-Channel Recorder. Recordings made on the M3160A may look slightly different to those described
here. See the documentation supplied with the Information Center for information on the 4-Channel
Starting and Stopping Recordings
The recordings pop-up keys let you start and stop recordings. Select the
call up the line of pop-up keys. Scroll right or left to see any pop-up keys not displayed.
The selection of pop-up keys available depends on the monitor you are using.
RT A Recordng
RT B Recordng
RT C Recordng
All ECG Waves
To quickstart any type of recording using a pre-configured recordings template,
Alternatively, you can
To quickstart a delayed recording,
Select the SmartKey
You can also start a delayed recording by pressing the Run/Cont key on the recorder module.
Timed (non-continuous) recordings stop when their runtime is over. Continuous recordings continue
until stopped manually or by an INOP condition.
To extend an ongoing recording by its runtime, reselect its
To make an ongoing recording continuous, reselect its
You can also make an ongoing recording continuous by pressing the Run/Cont key on the recorder
Stop All Recordng
SmartKey and then select the pop-up key of the recording type you want
, then select the recording type.
to immediately start a delayed recording.
pop-up key twice within 5 seconds.
pop-up key once.