A SmartKey is a configurable graphical key, normally located at the bottom of the main screen. On
some models, a selection of SmartKeys is displayed by selecting the SmartKeys permanent key on the
right of the main screen.
SmartKeys give you fast access to functions. The selection of SmartKeys available on your monitor
depends on your monitor configuration and on the options purchased. If you have an integrated PC
(iPC) you may also see SmartKeys generated by applications on the iPC.
- pauses alarm indicators. Pause duration depends on monitor
configuration. If pause duration is infinite, this key is labeled
Select again to immediately re-enable alarm indicators.
- acknowledges all active alarms by switching off audible alarm indicators and
- close all open menus and windows and return to the main screen.
- enter main setup menu.
enter profile menu, or revert to
show BIS Sensor
set alarm limits
change alarm volume
change QRS volume
enter standby mode - suspends
patient monitoring. All waves and
numerics disappear from the display.
All settings and patient data
information are retained.
review beat labels (annotate
change amplitude (size) of ECG
change Screen, or revert to default
quick admit a patient
enter patient demographics menu to
end case to discharge a patient
view information for patients in
change screen brightness (not for
enter cardiac output procedure