Selecting Screen Elements
Select a screen element to tell the monitor to carry out the actions linked to the element. For example,
select the Patient Identification element to call up the
HR numeric to call up the
Note that the space between each line of a menu may be configured to wide or narrow to facilitate
your most common method of operation, either touch, remote control or a pointing device such as a
Using the Touchscreen
Select screen elements by pressing them directly on the monitor's screen.
Disabling Touchscreen Operation
To temporarily disable touchscreen operation of the monitor, press and hold the
permanent key. A padlock will appear on the
Press and hold the
Using a Mouse or Trackball
If you are using a mouse or trackball, select screen elements by clicking on them (press and release the
left mouse button). While you are moving the mouse, a cursor appears and a highlight shows your
You can move windows and menus using the Touchscreen or a mouse. To move a window,
Select the title of the window and keep your finger on the title, or the mouse button pressed.
Move your finger on the Touchscreen, or move the mouse, to move the window.
Take your finger off the screen, or release the mouse button, to place the window in the final
The new position is only active until the window or menu is closed. Not all locations on the screen can
be a target position, a window cannot overlap the monitor info line, the alarms and INOPs or the
The monitor has four different types of keys:
A permanent key is a graphical key that remains on the screen all the time to give you fast access to
menu. Select the ECG wave segment to call up the
permanent key again to re-enable the touchscreen operation.
window, or select the