The optional M3015A Microstream CO
either pressure or temperature to the MMS. The optional M3015B Microstream CO
microstream capnography, two pressures and a temperature to the MMS.
The optional M3016A Mainstream CO
pressure or temperature to the MMS.
When a capnography extension is connected to an X2 MMS with CO
will be automatically deactivated in favor of the one in the X2. If you prefer to use the CO
measurement on the extension, you can activate it via the measurement selection key (see "Resolving
Label Conflicts" on page 44).
Pressure connectors (red) - M3015A optional
Temperature connector (brown) - M3015A optional
Microstream connector CO
Gas sample outlet
extension adds microstream capnography and optionally
extension adds mainstream capnography and optionally either
Pressure connector (red)
Temperature connector (brown)
Mainstream/sidestream connector CO
, the CO
from the extension