TESY DHF10CEL Usage Instructions page 4

Hide thumbs Also See for DHF10CEL:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
After a period of working,when environment humidity
EN
is lower than the selected humidity by 2%, compressor
will stop and fan stops working 3 mintues later;When
environment humidity is equel to or higher than the
selected humidity by 2%, compressor will restart once
3-minute compressor protection time over.
5.
Press
button can be timer setting:
Press the button to program the time when the unit
turns on and turns off. If you want to cancel the timer
programming, press the button to adjust the time at
00, and press the button ,it will be circulate from 00-
01-02......23-24.It is the programmed time to switch
the machine. The programmed time will be cancelled
when to switch compressor manually each time. The
programmed time remains unchanged if the machine
stops to wok due to water full or during defrosting.
6.
Press
button (Optional)
When press
button, the Ion function and UV function
will be open and the indication lights.(Optional)
DRAINING THE COLLECTED WATER
When the drainage tank is full, the tank full indicator
light will turn on, the operation will stop automatically
and the buzzer will beep 15 times to alert the user, that
the water need to be emptied from the drainage tank.
Emptying the Drainage Tank:
Lightly press on the sides of the tank with both
hands and pull the tank out gently.
4
Usage and Storage Instructions
Discard the collected water
Note
1.
Do not remove the float from the water tank. The
water full sensor will no longer be able to detect
the water level correctly without the float and water
may leak from the water tank.
2.
If the drainage tank is dirty, wash it with cold or
lukewarm water. Do not use detergent, scouring
pads, chemically treated dust cloths, gasoline,
benzene, thinner, or other solvents, as these can
scratch and damage the tank and cause water
leakage .
3.
When replacing the drainage tank, press the tank
firmly into place with both hands. If the tank is not
positioned properly, the "TANK FULL" sensor will be
activated, and the dehumidifier will not operate.
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents