Discs Information; Basic Playback; Playing An Mp3 Disc - Philips MX 5000DMX User Manual

Discs information

CHAPTER 1
DVD video discs may have one or more Titles, and each
Title may have one or more Chapters.
Playback stops at the end of each Title.
1 2 3
Audio CDs contain only Tracks.

Basic playback

CAUTION!
– Do not move the disc player during playback, as
doing so might damage the DVD system.
– Do not push on the disc tray or put any objects
other than disc on the disc tray. Doing so may
cause the disc player malfunction.
1
Press POWER to switch the
system on.
2
Adjust SOURCE (or press
DVD/CD on the remote control)
to select DVD/CD.
Press one of the OPEN 0 to
3
open the desired disc tray.
4
Load a disc with the label side
facing up.
Press again the corresponding OPEN 0 button to close
5
the disc tray.
There will be a short delay while the player identifies
the disc and reads the menu from the disc.
The selected disc's number begins to flash.
Some discs will start playing automatically, while others will
display the Disc Contents Menu on the TV screen. If the
menu is presented, use 341 2 keys to highlight your
selection and press OK to confirm or numeric keypad
(0-9) to select a play option.
Press £ (É Å ) to start playback.
6
Notes:
– If you leave the disc tray open for more than 8 minutes,
the disc tray automatically closes.
– Your player will not play discs that have a region code
different from the region code of your player.
– When the inhibit icon (Ä) appears on the TV screen when a
button is pressed, it means the function is not available on the
disc you are playing.
DVD-VIDEO DISC
TITLE 1 TITLE 2
CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
AUDIO CD
TRACKS
4 5 6 7 8 9 10 11 12 ...
PO W
ER ON
/O FF
To interrupt playback
Press £ (É Å ).
The picture freezes and the sound will be muted.
To resume playback, press £ (É Å ) again.
To stop playback
Press Ç.
To select a another disc
Press DISC SKIP (or DVD/CD) until the desired disc
loads.
The current selected disc's number and "LOADING"
begin to flash.
If a disc has loaded, it automatically plays.

Playing an MP3 disc

Playing an MP3 disc is only possible within an album.
1
Load an MP3 disc.
The MP3 menu is displayed on the TV screen.
To select a desired album, press 1 / 2, 3 / 4 button,
2
followed by £ (É Å ) or OK.
On the player display screen, "FOLDER XX" is
displayed.
To select a desired title, press 1 / 2, 3 / 4 button.
3
On the player display screen, "FILE XXX" is displayed.
To return to the previous menu, press Ç, followed by
1 / 2, 3 / 4 button.
To start playback, press £ (É Å ).
4
The disc will stop playing after completing the playback
of all the titles in the selected album.
To play the next or previous title during playback, press
S or T button.
You can also select the desired album/title number directly
using the numeric keypad (0-9).
In stop mode, numbers are used for album selection.
In play mode, numbers are used for title selection.
Notes:
– When the system does not read a file, "?" will be displayed.
– It is not possible to create a program with MP3 tracks from
multiple CDs, or combined with normal audio tracks.
Operations
O
17
PERATIONS