Philips LX3500 Quick Use Manual

Quick Use
Quick Use
Guide
Guide
T o connect your LX3500 Home
Cinema Surround Receiver:
1
SPEAKER CONNECTIONS
a. • Connect the Front Right (+,-) speaker wires to
the FR (Red +,-) speaker terminals on the Receiver.
• Connect the Front Left (+,-) speaker wires to the
FL (White +,-) speaker terminals.
• Connect the Center speaker wires to the C (Green
+,-) speaker terminals.
b. • Connect the Surround Right (rear speaker) wires to
the SR (Gray +,- ) speaker terminals.
• Connect the Surround Left (rear speaker) wires to
the SL (Blue +,- ) speaker terminals.
c. • Connect the Subwoofer speaker AUDIO INPUT
jack to the WOOFER LINE OUT jack on the receiv-
er. Use the supplied black cable with RCA connec-
tors on each end.
2
VIDEO CONNECTION
• Connect the yellow VIDEO OUT jack on the
Receiver to the matching VIDEO IN jack on the TV.
OPTIONAL TV Audio Connection
In order to listen to normal TV broadcast channels
through the Home Cinema Surround Receiver (if your
TV has AUDIO OUT jacks) you must make an audio
connection.
IMPORTANT! The Receiver will use all surround
sound speakers only if the TV broadcast is in a surround
sound format (Dolby Digital, DTS, Dolby Pro Logic). If
the broadcast is in stereo only, some of the surround
speakers will not be active.
• Connect the red and white pair of audio cables from
the TV AUDIO IN (Left & Right) jacks on the
Receiver to the AUDIO OUT (Left & Right) jacks on
the TV.
NOTE: When listening to TV programs, the Receiver
must be set to the AUX mode for the sound to be heard.
Use this simple and quick way to watch your favorite
DVD movie and enjoy your Home Cinema experience!
x5
75 AVIN
AUDIO OUT
L
R
H H
ELPFUL INTS
Your TV capability determines which
type of video connection you can make
with the DVD Receiver.
If your TV only has a single Antenna In
75
jack, you will need an accessory RF
Modulator to view DVD playback on your
ANTENNA IN
TV. The RF Modulator converts the video from
the Receiver so it can play through the TV's
Antenna connector.
x1
See your electronics retailer or contact Philips for
Y
details on RF Modulator availability.
If you use an RF modulator, set the TV to channel
3 or 4. Set the RF modulator's 3/4 switch to the
same channel.
Back of RF Modulator
(example only)
ANT IN TO TV
VIDEO AUDIO IN
IN R L
Antenna or Cable TV Signal
To DVD Receiver
S-VIDEO
Pr/Cr Pb/Cb Y If your TV has S-Video or
IN
Component (PB PR Y) jacks
you can connect the receiver using
one of these for a higher quality connection. See
Y
your instruction manual for details.
Rear of TV
75 AV IN
AUDIO
OUT
L
S-VIDEO
IN
R
COMPONENT PrCr PbCb
VIDEO OUT
AM
CENTER
AUDIO OU AUDIO IN
LINE OUT
AM/FM
WOOPER
ANTENNA AUX
LINE OUT
1c
CH3 CH4
Subwoofer
Flip the page to start DVD playback and arrange the surround speakers.
Front Speaker (Right) Center Speaker
2
Y
P-SCAN
FR
+
VIDEO
OFF ON S-VIDEO
OUT
OUT
DIGITAL OUT
-
R
SPEAKER
OPTICAL COAXIAL
Rear Speaker
(Surround Right)
Note: You must turn on the
power switch on the front
of Subwoofer when in
operation.
a
Front Speaker (Left)
1a
SR
+
-
4
CLASS 1
LASER PRODUCT
Rear Speaker
1b
(Surround Left)
Connecting Speaker Cable
.0 4
7 "
(1 2
m m
)
P U
S H
IN
PUSH
DOWN
b c