Never turn this product off and disconnect the device while the Bluetooth setting operation is being
[PIN Code Input]
[Bluetooth Memory Clear]
Switching the connected Bluetooth device
After registering and connecting the Bluetooth devices to this product, you can switch
among the devices using the switch devices key in the phone function and some audio
• You can register up to five Bluetooth devices on this product (page 22).
• You can connect one of the registered devices to this product. In cases where the
registered device is equipped with a phone function, a total of two devices can be
connected at the same time when using the phone function. If two of the five
Connect, disconnect, or delete registered Bluetooth device
to delete registered device.
To connect a registered Bluetooth device manually, touch
the name of the device.
To disconnect the device, touch the name of the connected
device in the list.
Connect the Bluetooth device manually in the following cases:
• Two or more Bluetooth devices are registered, and you want to
manually select the device to be used.
• You want to reconnect a disconnected Bluetooth device.
• Connection cannot be established automatically for some
Select [On] to connect the last connected Bluetooth device
If two Bluetooth devices were connected the last time, the two
devices are connected to this product automatically in the order
that they are registered in the device list.
Select [On] to make this product visible to the other device.
Change the PIN code for Bluetooth connection.
The default PIN code is "0000".
Touch  to  to input the pin code (up to 8 digits).
Displaying the device name and address of this product.
Touch [Clear] then [OK] to clear the Bluetooth memory.
- 23 -