Parent Unit Power Supply
1. Insert the DC plug of the power adapter into the DC socket on the side of
the Parent Unit.
2. Connect the other end of the power adapter to a suitable electrical outlet.
The battery status indicator lights up in green.
Only use the supplied power adapter (5V DC / 1000mA) and battery pack.
While the Parent Unit can work with the power adapter connected, without a
battery pack, it is recommended that you install and charge the rechargeable
battery pack fully before use. This will allow the Parent Unit to operate on
battery in the event of a power failure, or when moving to a different room.
3. Once the Baby and Parent Units are both switched ON, the display on the
Parent Unit will show the color image captured by the Baby Unit. But if the
room is dark, the image will be displayed in black and white and with a
icon, due to infra-red illumination by the Baby Unit.
4. If there is no connection or you are out of range, the video display will go
off, the symbol
closer to the Baby Unit to re-establish the link.
will flash on the LCD screen. Move the Parent Unit