Siemens TE 806 Series Instruction Manual page 25

Hide thumbs Also See for TE 806 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Empty drip tray
Replace drip tray
■ Empty the drip tray 23 and reinsert it.
The appliance is ready for use again.
calc'nClean
Duration: approx. 36 minutes.
c alc'nClean combines the separate
f unctions of descaling and cleaning.
If both programmes are due to be run
soon, the espresso machine automatically
s uggests this service programme.
Cleaning and service
Short rinse
milk system
calc'nClean
The start button 8 flashes while the
different c alc'nClean processes are running.
The figures on the top right indicate the
progress of the programme.
Important: If there is a water filter in the
water tank 11, it needs to be removed
before the service programme is run.
à
■ Press the
button 3.
calc'nClean
start
■ Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
■ Empty the drip tray 23 and reinsert it.
■ Swivel the coffee outlet 9 to the right until
it clicks into place.
start
Service Programmes
Place 1 l container
Place suction pipe in container
■ Place a container with a capacity of at
least 1 l under the milk frother 10.
■ Place the end of the suction pipe 10d in
the container.
■ Press the start button 8.
Cleaning
Open powder compartment
■ Open the powder compartment 18.
Insert Siemens cleaning tablet
and close drawer
■ Drop a Siemens cleaning tablet in the
drawer 18 and close.
Remove filter
start
Info: If the water filter is activated, the
display will prompt you to remove the filter,
then press the start button 8 again.
Add 0.5 l water and descaler
■ Pour lukewarm water into the empty
water tank 11 up to the "0.5 l" mark and
then dissolve 1 Siemens descaling tablet
TZ80002 in it.
■ Press the start button 8. The d escaling
programme now runs for about
20 minutes.
Descaling
Not enough descaling fluid.
Refill fluid
start
Info: If there is not enough descaling solu-
tion in the water tank 11, the corresponding
prompt is displayed. Pour in descaling solu-
tion and press the start button 8 again.
en
start
start
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te 803 series

Table of Contents