Coopers 10566 Instructions For Use

Wireless Doorbell
Please read and retain these instructions for future reference
Power Details: Input Voltage (Receiver): 110-240V a.c., 50/60Hz, 0.1A
The receiver measures H8cm xW8cm xD3cm (31/4in x31/4in x11/4in)
Input Voltage (Doorbell button transmitter): 1 x A23 12V d.c. Alkaline battery included.
The transmitter measures L7cm xW4cm xD1.5cm (23/4in x11/2in x1/2in).
Operating Frequency: 433.92MHz± 200 KHz
Accessories: Screws, Adhesive sticker, Instruction manual
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new Wireless Doorbell.

SAFETY INSTRUCTIONS:

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:

READ ALL INSTRUCTIONS BEFORE USE.

TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE PLUG OR APPLIANCE, IN WATER OR
ANY OTHER LIQUID.

UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.

DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED PLUG OR AFTER THE APPLIANCE
MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY WAY.

THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF
STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.

FOR DOMESTIC USE ONLY.

DO NOT PLACE ON OR NEAR HEAT SOURCES.

DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.

DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED
FOR.

BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE
FOUND. TAKE CARE NOT TO DROP THE APPLIANCEAS HEAVY IMPACTS MAY CAUSE INTERNAL
DAMAGE.

Brief introduction:

1. Working distance: 200-300 metres working range in open air.
2. Flashing receiver has 4 working modes.
3. Plug-in receiver.
Instructions for Use
10566
v002:30/03/17