Final Assembly Parts - Fluke 435-II Service Manual

Fluke 434-II/435-II/437-II
Service Manual

3.4 Final Assembly Parts

See Table below. In Chapter 6 – Disassembling the Analyzer, pictures are present giving
an impression on how the instrument is constructed.
Dedicated pictues with item numbers are scheduled for a future revision of this Service
Information.
Part or Kit
Case Set 43x-II
Quarter turn screw
Decal Set for Input
Sockets, Colored
Decal Set for Input
Sockets, Black &
White
Li-ion Battery Pack
Li-ion Battery Pack
Lens/decal 434-II
Lens/decal 435-II
Lens/decal 437-II
LCD assy Flk 43x-II
and Flk-190-II
Topholster 43x-II (Input
Cover)
Mounting Material Set
43x-II
3-4
Table 3-1. Final Assembly Parts and Kits
Ordering Code
4161577
Inner lens (for double isolation)
Dustseal long (2x, around screen)
Dustseal short (2x, around screen)
Adhesive foam (for battery door)
948609
4137197 Supplied with Analyzer as standard
4137201
BP290 (standard)
BP291 (optional)
4161589
4161592
4161605
3981844
4161610
4161622 Selftapping screw black (2 pcs/instr,
Dowel (6 pcs/instr, to fix side strap +
Steel plate for Kensington lock (1
Selftapping screw blank (6 pcs/instr,
to fix bottom case and battery door
Screw M3x6 (2 pcs/instr, to fix
Square nut M3 (2 pcs/instr, to fix
Selftapping screw blank (6 pcs/instr,
to fix Main PCA module to Front
Consists of Following Parts
Front case (excl. lens/decal)
Case seal (white)
Bottom case assy
Battery door
Quarter turn screw (2x)
Standup bracket
For battery door (1x)
accessory
Stuck on Analyzer at delivery
26 Wh, 10.8 V
52 Wh, 10.8 V
---
---
---
LCD module
LCD fixation foam
Flat cable
Excluding decals
to fix topholster)
hang strap)
pce/instr)
detection)
bottom holster)
bottom holster)
Figure/Item nr
3-2/21
---
---
---
3-2/27
3-1/3
3-1/16
---
---
3-1/18
---
---
---
3-1/17
3-1/17
---
---
---
3-2/23
3-1/1
3-1/2
3-1/5
3-1/9
3-1/4
3-1/8
3-1/12
3-1/12
3-2/22