Repairs; Birdies; Resetting The Scanner (Clearing All Memories); Technical Specifications - Uniden UBC370CLT Owner's Manual

REPAIRS

Do not attempt any repair. The scanner contains no user serviceable parts.
Contact info.avera.eu or take it to a qualified repair technician.

BIRDIES

All radios can receive "birdies" (undesired signals). If your scanner stops
during Scan mode and no sound is heard, it might be receiving a birdie. Birdies
are internally generated signals inherent in the electronics of the scanner.
Press L/O to lock out the channel.

RESETTING THE SCANNER (CLEARING ALL MEMORIES)

To reset the scanner to factory defaults, disconnect power to the scanner and
remove any batteries if they are installed.. Then, while holding down 2, 9, and
HOLD, reconnect power to the scanner. All scanner memory contents are
erased and the band plan resets to default.

TECHNICAL SPECIFICATIONS

Band Coverage
Sensitivity (nominal) 12dB SINAD: VHF Low Band
Channels
Scan Rate
Search Rate
Time Accuracy
: 16 Bands
(FM) 25.0050 MHz
(FM) 40.8400 MHz
(FM) 54.0500 MHz
(FM) 86.2750 MHz
(WFM) 107.9000 MHz
Aircraft Band
(AM) 118.8000 MHz
(AM) 127.1750 MHz
(AM) 135.5000 MHz
VHF High Band
(FM) 138.1500 MHz
(FM) 162.4000 MHz
(FM) 173.2250 MHz
UHF Band
(FM) 406.8750 MHz
(FM) 453.2500 MHz
(FM) 511.9125 MHz
Public Service Band
(FM) 806.0000 MHz
(FM) 857.2000 MHz
(FM) 954.9125 MHz
: 500 (50 channels x 10 Banks)
: Up to 90 channels per second
: Up to 90 steps per second (Up to 270 steps
per second at 5 kHz step)
: +/ 20 seconds per month at normal
−
temperature (25
0.3 μV
0.3 μV
0.3 μV
0.3 μV
0.8 μV
0.4 μV
0.4 μV
0.4 μV
0.3 μV
0.3 μV
0.3 μV
0.3 μV
0.3 μV
0.3 μV
0.4 μV
0.4 μV
0.4 μV
° C ± 5 ° C)
25