Download  Print this page

Manual Defibrillation Alarms; Troubleshooting - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs

Advertisement

6: Manual Defibrillation

Manual Defibrillation Alarms

Defibrillation alarms can be generated for the conditions shown in
visual alerts when activated by the Alarms button. When you switch patient categories, all parameter
alarm limits change to the new patient category. These changes are retained when you switch modes.
For patients that are ≥ 25kg or ≥ 8 years old, use Adult patient category.
For patients <25kg or < 8 years old, use Infant/Child patient category.
For more information on alarms, see
Table 18
Alarm Message
Pads Off
Shock Aborted
Abnormal Shock
Dose Delivered
Pads/Paddle Type
Unknown
Equipment
Disabled: Therapy
Paddles Power
Overload

Troubleshooting

If your HeartStart XL+ does not operate as expected during Manual Defibrillation, see
"Defibrillation and Pacing Problems"
If there is a delay in delivering therapy, start CPR if indicated.
80
"Alarms"
Defibrillation Alarms
Condition
With pads in use, the connection
between the device and patient
has been lost.
A shock has been automatically
aborted.
Abnormal shock dose delivered
due to marginal patient
impedance.
The device detected a change in
paddles or pads type or the
therapy cable identification is
invalid.
Therapy is disabled due to an
equipment failure.
A power overload has been
detected in the paddles.
on page 180.
Table
18. There are both audio and
on page 33.
Type of Alarm
High Priority
Non-Latching
Alarm
High Priority
Latching Alarm
Medium Priority
Latching Alarm
Manual Defibrillation Alarms
Indication
Red Alarm message with
alarm tone
Yellow Alarm message with
alarm tone
Table 46

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: