Download  Print this page

Philips HeartStart XL Plus 861290 Instructions For Use Manual Page 42

Defibrillator monitor.
Hide thumbs

Advertisement

The Display
Menus
Menus with controls and options specific to each HeartStart XL+ function are easily accessible using the
Menu Select and Navigation buttons located on the front panel. Menus are used to adjust volume, select
waveforms, select waves for printing, set alarms, enter patient information, generate reports and complete
a variety of other tasks.
To display a menu, press the Menu Select button
buttons to scroll up or down through the available choices until the desired selection is highlighted. The
menus have a wrap-around scrolling feature - once you hit the bottom of a menu, it automatically wraps
around to the top of the menu and continues scrolling. Holding either end of the Navigation button
down accelerates scrolling through the menu choices in that direction.
To make a selection, highlight the menu entry you want and press the Menu Select button. Select Exit to
close the menu without making a selection. Arrows at each end of the menu indicate additional list
options are available in that direction on the menu. Use the Navigation button to scroll up or down to
reveal the remaining options.
Depending upon your given situation, there are times when some options are unavailable for use. Menu
choices are grayed out when they are unavailable. They cannot be highlighted or selected. See
Figure 34
NOTE: Menus are removed from the display when the Charge button is pressed.
Sample Menu
Menu
Displayed Waves
Measurements/Alarms
Patient Info
3: Working with the HeartStart XL+
and then use the up or down
Scroll Up Arrow
Volume
Selected Item
Trends
Disabled Item
Other
Scroll Down Arrow
Navigation
Figure
34.
31

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: