Download  Print this page

Accessory Storage System - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs

Advertisement

2: Device Basics

Accessory Storage System

The HeartStart XL+ can be ordered with an optional Accessory Storage System to assist in cable and
accessory management.
NOTE: You need a Phillips-head screwdriver to install the Accessory Storage System pouches.
Attaching the Pouches
To attach your HeartStart XL+ Accessory Storage System to your defibrillator:
1
Insert the hook on the bottom of the storage system's side pouch into the groove along the side of the
HeartStart XL+ (see
Lift the pouch up into place and secure in two locations with Phillips screws (see
2
Drape the double-sided black pocket over the outside end of the pouch, aligning the tapered edge of
3
the bag with the bottom of the pouch. (see
4
Secure the bottom edges of the bag by snapping them together through the holes along the bottom
edge of the pouch. (see
Figure 19
1
3
Figure 19
NOTE:
device. Use the same procedure to install the pouch on the left (monitoring) side.
16
Figure 19
- Step 1).
Figure 19
Attaching the Pouches
illustrates attaching the Accessory Storage System pouch on the right (therapy) side of the
Figure 19
- Step 3)
- Step 4)
2
4
Basic Orientation
Figure 19
- Step 2).

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: