Download  Print this page

Back Panel - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs


Basic Orientation

Back Panel

The back panel of the HeartStart XL+ has a compartment for the Lithium Ion battery. It also contains
the AC power connection, the ECG Out jack to connect to an external monitor, and the LAN port. See
14. For more information on ECG Out, see the ECG Out Cable Application Note which can be
found on the Philips website at
Figure 14
WARNING: Do not connect a LAN cable to the HeartStart XL+ while in a clinical mode. Incorrect ECG diagnosis
may result due to excessive noise.
Installing the Battery
To install the HeartStart XL+ Lithium Ion battery:
Align the battery in the battery compartment. Confirm the arrow on the Battery Tab is pointed up.
Insert the battery into the battery compartment until you hear the Battery Latch lock into place.
Figure 15
Back Side View
Cable Wrap Snap
AC Connection
Installing the Battery
LAN Port
100 - 240 V
50 - 60 Hz
1- 0.46 A
Battery Latch
2: Device Basics
Battery Compartment


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: