Download  Print this page

Printing Settings; Restoring Default Settings - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs

Advertisement

13: Configuration

Printing Settings

To print the configuration settings:
In Configuration Mode, press the Menu Select button.
1
Using the Navigation buttons, select
2
3
Press the Menu Select button to print the report. See
NOTE: To stop printing, press the Print button.
Figure 70
Configuration Report
(Current Date)
HeartStart XL+
S/N: (Device Serial Number)
(Software revision)
Following the General Settings listing, the Configuration Report continues to list the configured device
settings in the order they are listed in Configuration Mode. See
page 139.
NOTE: Configuration setting information appearing in parenthesis in

Restoring Default Settings

To return all configuration settings to those originally set during manufacturing:
Press the
1
Enter the Configuration Password.
2
3
Press the
4
Once you are prompted to save changes, select
138
Sample Configuration Report
Options
(All installed
options on your
HeartStart XL+ are
listed here,
including field
upgrade kits and
factory installed
options.)
by the current setting when an actual Configuration Report is printed. For example:
(Current Date) is replaced with the date the report is printed.
[Change Config]
soft key.
[Factory Defaults]
soft key.
Print Configuration
.
Figure
70.
Date/Time format Settings
Date Format: (setting)
Time Format: (setting)
Auto Correct for Daylight
Savings Time: (setting)
DST Start: (setting)
DST End: (setting)
DST Offset: (setting)
"Configurable Parameters"
Yes
and press the Menu Select button.
Overview
General Settings
Patient Category: (setting)
Alarm tone: (setting)
Alarm Pause Time: (setting)
Alarm Volume: (setting)
Minimum Alarm Volume: (setting)
Voice Volume: (setting)
QRS Volume: (setting)
Units Display: (setting)
Export Without Patient Info: (setting)
on
Figure 70
are replaced

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: