To change default settings in Configuration Mode:
Enter the configuration password:
Using the Navigation buttons, select the first number and press the Menu Select button.
Use the Navigation and Menu Select buttons to enter the remaining numbers in the password.
When finished, select
Press the Menu Select button and use the Navigation buttons to select the parameter to be changed.
Then press the Menu Select button.
Select the sub-menu you want to change, then press the Menu Select button.
Select the new default option. Press the Menu Select button to select the highlighted choice.
Once the desired changes have been made, press the
Configuration Main screen. Press the
before saving changes, you are asked if you want to exit without saving the changes.
If you want to save the changes, select
If you do not want to save the configuration, select
To export configuration settings to a USB drive:
Confirm you have a USB drive inserted into the USB port and you are in Configuration Mode.
The HeartStart XL+ copies your current configuration to the USB drive.
NOTE: If you already have a configuration stored on the USB drive, exporting another to the USB drive
overwrites the one already on the drive.
To import configuration settings from a USB drive:
Once in Configuration Mode, insert the USB drive with the saved settings into the USB port.
Make any device-specific configuration changes.
and press the Menu Select button.
soft key to advance to the next parameter and repeat steps 4-6 to make
soft key to return to normal operating mode. If you press
soft key and then exit Configuration Mode.
soft key and enter the Configuration password.
soft key. The HeartStart XL+ copies the current configuration from the USB
soft key to save the new configuration.
soft key returns you to the previous settings.
soft key resets all settings to factory defaults.
, press the Menu Select button, press the
and press the Menu Select button to exit
soft key to return to the