Download  Print this page

Chapter 13 Configuration; Overview; Entering Configuration Mode; Accessing Configuration Mode - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs

Advertisement

This chapter describes the configurable parameters of the HeartStart XL+ and procedures for modifying
configuration.

Overview

Configuration settings allow you to customize the HeartStart XL+ to meet your needs. Configuration is
viewed and changed through the Configuration Menu. A password is required to change your device's
configuration.
NOTES: As you are making configuration choices, consider all the clinical environments the HeartStart XL+ may
be used in. Choices for one department might not be suitable for another department.
The change configuration password is printed on the front of the HeartStart XL+ User Documentation
CD-ROM.

Entering Configuration Mode

Once you enter Configuration Mode without a password, you can view, print or export configuration
settings and you can also change the date and time. Once you enter the password, you can view, change,
print, save and export configuration settings. New configuration settings are not saved until you press the
[Save Changes]
WARNING: Do not perform configuration activities while the HeartStart XL+ is connected to a patient.

Accessing Configuration Mode

To access Configuration Mode:
Turn the Therapy knob to
1
Press the Menu Select button.
2
3
Using the Navigation buttons, select
4
Select
To confirm your selection, select
5
returned to the mode you started from.
Once in Configuration Mode, press the
soft key.
Monitor
Configuration
and press the Menu Select button.
Yes
Configuration
Manual Defibrillation
,
or
Other
and press the Menu Select button.
and press the Menu Select button. If you select
[Exit Config]
soft key to return to clinical operation.
13
Pacer
.
No
, you are
135

Advertisement

Table of Contents

   Related Manuals for Philips HeartStart XL Plus 861290

Comments to this Manuals

Symbols: 0
Latest comments: