Download  Print this page

Philips HeartStart XL Plus 861290 Instructions For Use Manual Page 136

Defibrillator monitor.
Hide thumbs

Advertisement

Event Summary
Table 26
Event Information (Continued)
Logged Event
NBP Alarms Off/On
NBP Limits Systolic (low
value, high value)
NBP Limits Diastolic (low
value, high value)
NBP Limits Mean (low
value, high value)
NBPs High (value) > (limit) Logged when the patient's Systolic NBP is higher than the configured limit.
NBPs Low (value) < (limit)
NBPd High (value) > (limit) Logged when the patient's Diastolic NBP is higher than the configured limit.
NBPd Low (value) < (limit) Logged when the patient's Diastolic NBP is lower than the configured limit.
NBPm High (value) >
(limit)
NBPm Low (value) < (limit) Logged when the patient's Mean NBP is lower than the configured limit.
NBP Calibration Overdue
NBP Cuff Not Deflated
NBP Cuff Overpressure
NBP Measurement Failed
NBP Error
NBP Equipment
Malfunction
Defibrillation
Charging to (value) J
Disarm Manual
Logged when NBP alarms are turned on or off and any subsequent change.
Logged when the Systolic NBP alarm limit is changed.
Logged when the Diastolic NBP alarm limit is changed.
Logged when the Mean NBP alarm limit is changed.
Logged when the patient's Systolic NBP is lower than the configured limit.
Logged when the patient's Mean NBP is higher than the configured limit.
Logged when NBP module calibration is due.
Logged when the NBP cuff fails to deflate after 3 minutes.
Logged when the NBP cuff pressure reaches 300 mmHg/40 kPa.
Logged when an NBP measurement fails to complete.
Logged when the device detects a non-critical NBP failure.
Logged when the NBP module detects a malfunction.
Logged when charging is initiated.
Logged when the device is disarmed manually.
12: Data Management
Frequency
125

Advertisement

Table of Contents

   Related Manuals for Philips HeartStart XL Plus 861290

Comments to this Manuals

Symbols: 0
Latest comments: