Download  Print this page

Changing Nbp Alarm And Source Limits; Enabling/disabling Nbp Alarms; Caring For Cuffs; Nbp Calibration - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs

Advertisement

10: Blood Pressure Monitoring
NOTE: NBP alarms are on unless you specifically turn them off or alarms for the entire device are off. Once
disabled, alarms remain off until they are turned back on.

Changing NBP Alarm and Source Limits

To change the NBP alarm source and/or limits:
Press the Menu Select button.
1
2
Using the Navigation buttons, select
Select
3
Select
4
5
Select the desired source for the alarm (
button.
Select the new high limit value and press the Menu Select button.
6
Select the new low limit and press the Menu Select button.
7

Enabling/Disabling NBP Alarms

To enable/disable NBP alarms:
Press the Menu Select button.
1
Using the Navigation buttons, select
2
3
Select
4
Select
WARNING: Turning alarms off prevents all alarms associated with the NBP measurement from being annunciated. If
an alarm condition occurs, no alarm indication is announced.

Caring for Cuffs

Refer to the manufacturer's instructions for care and cleaning of your NBP cuffs. To get the best results
from your cuffs, handle them with care and protect them from sharp objects.

NBP Calibration

NBP should be calibrated yearly. To calibrate the NBP module, call for service or refer to the
HeartStart XL+ Service Manual.

Troubleshooting

If your HeartStart XL+ does not operate as expected during NBP Monitoring, see
Monitoring Problems"
114
NBP
and press the Menu Select button.
NBP Limits
and press the Menu Select button.
NBP
and press the Menu Select button.
Alarms On
Alarms Off
(
) and press the Menu Select button.
on page 184.
Measurements/Alarms
and press the Menu Select button.
Systolic
Diastolic
Mean
,
or
Measurements/Alarms
and press the Menu Select button.
Caring for Cuffs
) and press the Menu Select
Table 48 "NBP

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: