Download  Print this page

Defibrillating During Pacing - Philips HeartStart XL Plus 861290 Instructions For Use Manual

Defibrillator monitor.
Hide thumbs

Advertisement

8: Pacing
To stop pacing:
Press the
Navigation buttons, select
flashing
OR
Move the Therapy knob away from the
WARNINGS: Use care when handling the multifunction electrode pads on the patient to avoid shock hazard during
pacing.
Use multifunction electrode pads prior to their expiration date. Discard pads after use. Do not reuse
pads. Do not use for more than 8 hours of continuous pacing.
If pacing is interrupted for any reason you must press the
If you are using the pacing function with battery and the Low Battery alarm sounds, connect the device
to external power to avoid interrupted pacing therapy.

Defibrillating During Pacing

If you need to defibrillate the patient during pacing, refer to the procedure for defibrillation in Manual
Defibrillation Mode (see
"AED Mode"
Defibrillation Mode energy setting or
To resume pacing after defibrillation, repeat the pacing procedure as described in
Pacing"
on page 93 or
selected prior to defibrillation (mode, rate and output) are retained. Be sure to confirm cardiac capture
has been retained.
CAUTION: Pacing must be turned off before defibrillating with a second defibrillator. Failure to do so could damage
the HeartStart XL+.
96
[Pause Pacing]
soft key. A prompt message asks you to confirm your action. Using the
Yes
to pause pacing; select
[Start Pacing]
soft key to resume pacing.
Chapter 6 "Manual Defibrillation"
on page 59). Once the Therapy knob is moved from the
AED
"Fixed Mode Pacing"
No
to continue pacing. Once paused, press the
Pacer
position.
[Start Pacing]
on page 73) or AED Mode
, pacing is stopped.
on page 95. When pacing is resumed, pacing settings
Defibrillating During Pacing
soft key to resume pacing.
(Chapter 5
Pacer
position to a Manual
"Demand Mode

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: