Advertisement
Connecting the Printer Adapter
The Printer Adapter allows you to connect a printer to your WebTV Internet Unit. Then, you can print the
information you find on the WebTV Network. To print, you will need: a WebTV Internet Unit; the Printer
Adapter; a Hewlett Packard Inkjet Printer (models HP400, HP600, HP660, HP680, or HP690); and a Printer
Cable (Centronics C36 male to DB25 male).
1
Disconnect the WebTV Internet Unit's power.
Caution: Disconnect from the WebTV Network, then com-
pletely disconnect the power cord from the WebTV Internet
Unit. Otherwise, the WebTV Internet Unit will not work.
2
port cover
Use the supplied wrench to remove the port cover
from the right side of the WebTV Internet Unit.
3
Connect the Printer Adapter to the port by press-
ing the connectors together. Tighten the Printer
Adapter thumb screws to secure the connection.
4
cable port
cable port
Connect one end (DB25 male/25-pin parallel) of the
printer cable to the cable port on the Printer
Adapter.
Connect the other end (Centronics C36 male) of
the printer cable to the cable port on the back of
the printer.
5
Plug in the WebTV Internet Unit's power cord.
Then, plug in the printer's power cord.
6
Turn on the printer.
7
Turn on the WebTV Internet Unit, then reconnect
to the WebTV Network.
Printing from the WebTV Network
1
Press the OPTIONS button on the remote.
2
Highlight Print, then press the GO button on the remote.
3
To print only the current screen, highlight Print Screen, then press the GO button on
the remote. To print the complete page, highlight Print, then press the GO button on
the remote.
When printing begins, STOP will be highlighted on-screen. To stop printing, press the GO but-
ton.
Advertisement
