Service Position - Panasonic DMC-TZ7EB Service Manual

7.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 RFKZ0416
2 RFKZ0477
3 RFKZ0445
4 RFKZ0416
5 VFK1906
7.3.1. Extension Cable Connections
CAUTION-1. (When servicing FLASH PCB)
1. Be sure to discharge the capacitor on FLASH PCB.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH PCB".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
Connection
FP9003 (MAIN) - CCD UNIT
FP9005 (MAIN) - LENS UNIT
PP9901 (MAIN) - PS9801(SUB)
FP9801 (SUB) - FP9901 (TOP OPERATION P.C.B.)
P8001 (FLASH PCB) - PP9903 (TOP OPERATION P.C.B.)
24
Form
41PIN 0.3 FFC
45PIN 0.4 FFC
100PIN B to B
41PIN 0.3 FFC
20PIN B to B