Ext Option; Procedure To Enter Ext Option; Ext Option Menu And Functions; Canceling Ext Option - Panasonic PT-AE900U Service Manual

PT-AE900U / PT-AE900E

2 Ext Option

This projector has EXT OPTION in addition to standard on-screen menus.
· There are SELF CHECK and FLICKER ADJ for service, etc.
2.1.

Procedure to enter EXT OPTION

1. When the projector is power ON, press "POWER" button on the main unit or remote control unit to display "POWER OFF"
confirmation screen.
2. Press the right-arrow "
3. On the main unit or remote control unit, press the buttons in order of up-arrow "
down-arrow " " and "ENTER".
(When the "ENTER" button is pressed, "EXT OPTION" menu is displayed.)
2.2.

EXT OPTION Menu and Functions

· FAN FULLMODE
Setting the cooling fan motor rotation speed
− − − − Switching ON "FAN FULLMODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULLMODE" is ON, changing "FAN CONTROL" in OPTION becomes impossible (setting FAN FULLMODE is given priority
more than FAN CONTROL).
· AUTO SETUP
Setting AUTO SETUP mode
− − − − NORMAL: To set the normal mode (the dot clock is adjusted strictly)
− − − − SPECIAL: To set the special mode (the dot clock is adjusted roughly)
* Do not change the initial setting (NORMAL).
· SELF CHECK
To enter the self-check mode
· FLICKER ADJ
To enter the flicker adjustment mode
· 525i SD
When non-standard signal of 525i/625i is inputted (AV amplifier, etc.), synchronization might be disordered according to
connected equipment. In this case, set 525i SD to ON.
· 525p OS
When 525p/625p signal is inputted, reflection noise (vertical striated beat) might be generated according to connected
equipment. In this case, set 525p OS to ON. However, the resolution decreases a little.
· HPLL
When non-standard signal of VIDEO/S-VIDEO is inputted (VCR, VHD, etc.), horizontal synchronization might be disordered
according to connected equipment. In this case, set HPLL to OFF.
2.3.

Canceling EXT OPTION

Press "MENU" button on the main unit or remote control unit.
" button to select "CANCEL" in the "POWER OFF" confirmation screen.
", down-arrow "
6
", up-arrow " ",