PT-AE900U / PT-AE900E
6 Disassembly Instructions
Warning:
· Be sure to unplug the power cord from the power outlet before disassembling this projector.
Caution:
· While turning over a printed circuit board, be sure to put a insulating material under it to prevent a short circuit.
· Printed circuit boards and wires must not be pulled forcibly, but be handled carefully.
· Connectors also must be handled carefully.
· After repairing this projector, be sure to put back the wires and connectors to the original condition.
6.1.
Printed Circuit Board and Main Parts Location
Electrical Parts
Optical Parts
14