Troubleshooting - Siemens TK 52 series Operating Instruction

en

Troubleshooting

Problem
No hot water or steam
discharge.
Foam insufficient or too
runny.
Coffee dispensing slows to
a trickle.
Coffee not dispensed.
Coffee has no "crema"
(creamy foam).
Grinding unit does not grind
the beans.
Grinding unit makes a loud
noise.
Button and button
a
alternately.
If problems cannot be eliminated, always call the hotline.
Guarantee
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from the
dealer from whom the appliance was pur­
Possible cause
Nozzle 8 is blocked.
Sleeve b on nozzle 8 not in
correct position.
Milk not suitable for
foaming.
Coffee is ground too fine.
Water tank not filled or not
correctly positioned.
Unsuitable type of coffee.
Beans no longer fresh.
Degree of grinding
inappropriate for beans.
Beans are not falling into
the grinding unit (beans too
oily).
Foreign objects in the
grinding unit (e.g. grit,
which can be found even in
superior types of coffee).
The brewing unit  is
flash
S
missing, or is not properly
inserted or secured.
Solution
Clean nozzle 8.
Push down sleeve b on
nozzle 8.
Use cold low­fat (1.5% fat)
milk.
Adjust the grinding unit to a
coarser setting.
Fill water tank and make
sure it is in the right posi­
tion. If necessary, fill water
pipes (see "Switching on
the appliance").
Change type of coffee used.
Use fresh beans.
Optimize degree of
grinding.
Gently tap the bean
container.
Call the hotline.
Insert and secure the
brewing unit .
chased. The bill of sale or receipt must be
produced when making any claim under the
terms of this guarantee.
Right of modification reserved.
en
17
17