zika TIG160S User Manual page 9

OPERATORS' MANUAL · TIG SERIES
R160A SC-A5
After the welding is completed, press the torch trigger again, and current will slowly drop to the crater current
value. Release the torch trigger after the crater is well filled, and the machine will stop working.
Downslope time control (10): The downslope time can be adjusted between 0 to 10 seconds.
Post-flow time control (11): The post-flow time is the period from the time when arc goes out to the time when
gas supply stops, and it can be adjusted between 1 to 10 seconds.
8