Download  Print this page

Advertisement

31
eifs catalog
www.demandproducts.com
CONTINUOUS INSULATION (CI)
SPECIAL FEATURE

Advertisement

Table of Contents

   Summary of Contents for Kawasaki J300 ABS 2014

  • Page 1 eifs catalog www.demandproducts.com CONTINUOUS INSULATION (CI) SPECIAL FEATURE...
  • Page 2 Solutions in over 120 countries. Demand Products Product Index FASTENERS Page 6-11 FOAM RECYCLING Page 58-59 HOT KNIVES Page 12-21 WATER MANAGEMENT Page 34-35 RASPS Page 26-29 MIXERS / SPRAYERS Page 24, 25 & 64 CHEMICALS Page 30-33 HAND TOOLS Page 40-51 FOAM CUTTING Page 52-57...
  • Page 3 1.800.325.7540 EXPERT ADVICE HOTKNIVES DURARASPS HOTWIRE MACHINES CUTTERS FOAM FASTENERS CUTTERS NEW TOOLS FOR MEETING THE NEW CODES FOR MORE ENERGY EFFICIENT COMMERCIAL bUILDINGS. TOOL New legislation* setting higher national and state standards for energy efficiency and re-setting commercial building energy codes in every state will create growing demand for continuous insulation (CI) products.
  • Page 4 Continuous Insulation (CI) What is CI? Continuous Insulation is different from what has been, more or less, the conventional approach of insulating spaces between framing studs. Non-continuous insulation inevitably creates pockets and gaps and air leakage resulting in ‘thermal bridging’ that can cost a typical steel frame wall up to 50 percent of its R-value and up to 24 percent or more of the R-value of a wood frame wall.
  • Page 5 Q&A Why CI? It’s a simple equation. Continuous insulation works. It works as an integral element in implementing Exterior Insulation and Finish Systems (known as EFIS). Architects and developers have experience with EFIS as an alternative or replacement for stucco. Now, they are recognizing how EFIS and utilizing continuous insulation is a tremendous approach to meeting the new, higher energy efficient commercial building codes.
  • Page 6 PBH & PB Washer ™ The builder’s Choice • 2” Diameter • Manufacturer Approved • Cone Design Prevents Popups Available in boxes • No Color White — bleed Thru 500 or 1000 • Finger Closures • Eliminates Thermal Shorts • Large Keyholes for Strong Mechanical bonding Item #...
  • Page 7 WASHERS PbH w/Wood/Lite-Metal Screw WOOD/LITE-METAL PBH and Wood/Lite-Metal Screws, Assembled with Washer for Wood and Lite-Gauge Metal Application, 20- to 26-gauge ⁄ ” 1” 1,000 16 lbs 135.00 2” ⁄ ” 1,000 18 lbs 145.00 ⁄ ” 2” 1,000 20 lbs 155.00 3”...
  • Page 8 WASHERS DP 300 Washer All Purpose PM Washer TOOL • Low Profile Design. Seats Flush • Key Holes Create Strong Mechanical bond • Large 1 ” Head Diameter • Strong Polypropylene Material Provides Impact Resistance and Long Life • Use for Lath and Plastic Lath Attachment Item # Qty Per Box approx.
  • Page 9 WASHERS DP500 Tab Washer Foam Tack Fastener Great for Lath & Stucco Holds Foam to Foam • G90 Chromium Plated Item # Description Price • Meets ASTM A653 Standard TAC75 ⁄ ” Trim to Foam Trim Tac (Pak of 250) 15.00 •...
  • Page 10 MASONRY Congrip • Quickest & best Way Unique Textured 2 ” for Fastening to Concrete Thin Profile Head Locks • Large 2 ” Head Coatings with • Reduces Installation Time by Up To 40% Multiple Key • Installs Quickly Holes •...
  • Page 11 PREMIUM SCREWS Wood-Lite Metal For Use For Use with Wood with Wood & Metal & Metal From 26-gauge to 20-gauge Premium Coated Screws For Use with For Use with Steel Concrete Masonry Steel 10 FREE MDB55 From 20-gauge to Drill Bits per box 12-gauge of 1,000 Screws Wood-Lite Metal –...
  • Page 12 HOT KNIFE CR Hot Knife CR CutRite ™ ™ HEATS UP TO 10” WIRE Complete with Case TOOL • 150 Watts • Includes 4” & 6” blades and Case • Electronic Circuit board Powered • Variable Power Control • Lightweight •...
  • Page 13 ACCESSORIES 6” Groove Adapter 1” Groove Adapter blades Up to 6” Wide blades Up to 1” Wide Item # Description Item # Description CR6G CR1G Hot Knife™ CR 6” Groover Plate Hot Knife™ CR 1” Groover Plate NWFW Flat Wire, per foot NWFW Flat Wire, per foot TOOL...
  • Page 14 HOT KNIFE The Original HoT KnIFE Item # Description Hot Knife Tool, 105 Watts ™ HKT250 Hot Knife Tool, w/ 2.5” Blade ™ TOOL HKT300 Hot Knife Tool, w/ 3.0” Blade ™ HKT450 Hot Knife Tool, w/ 4.5”Blade ™ HKT550 Hot Knife Tool, w/ 5.5”Blade ™...
  • Page 15 ACCESSORIES Hot Knife Kit 1 ™ Shaping Wire Tool Master Kit Precise bends in Flat Wire • Cuts both Expanded and Extruded Foam • Kit Includes: Wire Crimper & 10’ of NWFW Flat Wire • Cuts Fast, Clean and Accurately •...
  • Page 16 GROOVE JET Groove Jet 300 Hot Knife ™ Aesthetic Groove Cutter • Weights Only 4 Lbs. • Handles Up to 5” x 3” NWFW blades • Heats Up Fast • Cuts Clean with One Pass • Also Available in 220 Volts •...
  • Page 17 BLADES Groove Tool Handle & Accessories Handle, Custom blades, Custom Inserts Inserts & blade Kit Item # Description GTH02 Groove Tool Handle Handle GJBCUSTOM Custom Blade (Pkg of 3) GTICUSTOM Custom Insert (each) *CUSTOM SIZES AVAILAbLE blades GTH02 Square Groove Tool blades &...
  • Page 18 ZETZ Zetz 20 ™ Thermocutter • Excellent for Cutting Rubber, Polyethylene & Polypropylene Variable • Electronic Circuit board Powered Heat Control • Heats Up Quickly ZTC20 • Adjustable Temperature Control Comes with • Off-On Finger Control One Z50 Blade • 110 Volts. Also Available in 220 Volts •...
  • Page 19 HOT ROD Hot Rod ™ Super Duty 50 Amp EPS Panel Cutter • Strongest in the Industry • Cuts All Day Long Without Overheating • Uses Heavy Gauge Round and Flat Wire As Well As Standard Hot Knife blades • Variable Heat Control — Heats Up Extremely Fast •...
  • Page 20 CONTROLLER Geo 8’ Foam Hot Wire Kit Free-Hand Cutting • Hot Wire Handles • Mag8 Controller • From 24” to 108” • 100 Foot Roll of Inconel Wire • Carrying Case Item # Description Price 1,025.00 KITGFHWH Hot Wire Kit 85.00 IW100 Inconel Chrome Wire, 100 ft.
  • Page 21 MAXX SOLDERING GUN HKTMX MAXX Soldering Gun 2 IN 1, MAXX 2 1/2” Foam Cutting blade & Soldering Gun Hot Knife • 100 Watts of Power for Diverse Application • 110-Volt Transformer Power Supply • Ready to Use in 6 Seconds •...
  • Page 22 BOW CUTTERS Adjustable Leg Depth Control TOOL BowCutter 48 ™ 48” Free-Form Cutter w/ Depth Adjuster 48” • Can be Purchased With or Without our Magnum KITBC48M Power Supply • Uses NW100 Wire BowCutter 24 ™ 24” Free-Form Cutter • Can be Purchased With or Without our Magnum Power Supply 24 ”...
  • Page 23 MAGNUM CONTROLLERS Light Gauge Wire only Magnum Controllers & Wire ™ NW100 4’, 8’, 10’ and 17’ • Uses Light Gauge Wire Only • Each Size is Designed to Heat the Appropriate NW500 Length of Wire Hot Enough to Cut EPS Foam Heats NW100 Wire 24”...
  • Page 24 ARCH CUTTER Fully Adjustable. 53” Adjustable Radius Arm both X and Y Axis Arch Cutter Stand Alone Precision Price Arch Cutting AT8AC 1,193.00 Item # Description Price 1,108.00 AT8AC Arch Cutter Only 1,193.00 2,185.00 Controller 1,108.00 14” KITARCH Arch Cutter with Controller 2,185.00 Uses the Same Controller as the base &...
  • Page 25 TRI-MIXX TriMixx ™ Commercial Duty, 3-Position Production Mixer • Designed for Mixing and blending Industrial Coatings • Powered by Three 3/4 Horsepower Motors with a 5 to 1 Ratio Transmission • Emergency Stop button for Each Motor • Carriage Can be Positioned at Any Height •...
  • Page 26 ORIGINAL DURARASP TOOL DR614 DR414 DR814 DR214 Original DuraRasp • Item # Description Heavy brazed #12 Tungsten Grit ™ • DR214 2” x 14” Non-Gouging Rounded Corners • DR414 4” x 14” 12-Grit Tungsten Carbide Rasp Custom Crafted and Serial Numbered DR614 6”...
  • Page 27 TIGER CLAW The Industry Standard for Rasping EPS. outlasts Rasp Paper over 100 SM614 Soft-Grip Handle with Finger-Flow Ribs Top Quality Smoothie DuraRasp for Comfortable Control ™ ™ Steel Plate 24-Grit Tungsten Carbide Rasp • Item # Description Ornamental Shapes & base Coats •...
  • Page 28 SHOP VAC Weighs Only 2.5 lbs DuraVac Rasp ™ Specifications Vacuum Hand Rasp Dimensions: 7”W x 15”L Rasp Surface: 6” x 14” • Hose Size : 1 ” Lightweight • Removes EPS Dust Quickly • Weighs Just 2.5 Pounds • DuraRasp Plate Delivers Long Life ™...
  • Page 29 RASP PAPER AS814 Rasping Tools Standard Hand Rasp • High Quality Aluminum Plates • 16 Grit Adhesive Paper Item # Description Price AS414 Aluminum Standard Rasp, 4” x 14” 21.00 AS614 Aluminum Standard Rasp, 6” x 14” 24.00 AS814 Aluminum Standard Rasp, 8” x 14” 28.00 TOOL AS414...
  • Page 30 CLEANERS Finish-Up ™ Gentle EIFS Cleaner Gentle • Cleans and Removes Stucco From Tools • Removes Stucco From Concrete, brick, Glass & Wood • Does Not Damage Painted or Anodized Finishes Item # Description Price Finish-Up Spray, 14 oz. 9.50 ™...
  • Page 31 ADHESIVES Foam-Lok Adhesive ™ Foam-Lok Adhesive ™ Self Contained Pressurized Systems EPS Anchor-In-a-Can • Adheres EPS to EPS • Fast Setup Time — 5 Minutes* • • Solvent based Spray Cans Material is Clear Colored FLA30 • Green Tinted • Does Not Degrade the EPS •...
  • Page 32 ENERFOAM FREE FGUN2 *with the Purchase of a Case of EnerFoam 42 or EnerFoam 25 EnerFoam ™ Filler and Adhesive-In-One • Performs as a Foam Adhesive and a Filler • bonds Quickly to Almost Anything • One Can is Equal to 40 Quart Tubes of Adhesive •...
  • Page 33 FIREBLOCK Great Stuff Great Stuff ® ® Gaps and Cracks Insulation Wall and Floor Adhesive • • bonds to Most building Materials Performs as a Foam Adhesive • • Seals Gaps to 3” One Can is Equal to 16 Quart Tubes of Adhesive •...
  • Page 34 RAINTEK Universal Kickout Flashing Eliminates Field- Fabrication Errors • Saves Time & Money • Eliminates Field Fabrication Errors • Cures Galvanic Concerns • Flexible for Retrofits • Installs in Just Seconds • Handles all Temperature Extremes • Custom Molded Fabrication •...
  • Page 35 BACKER ROD Backer Rod Joint Sealer • Designed for Sealing EIFS Joints • Resistance to Moisture and Freeze-Cycle Problems • Conforms to Irregular Joints ” ⁄ • Non-absorbing Closed Cell Skin • Dispenses Easily from box to Joint ” ⁄ SR78 Item # Description...
  • Page 36 TAPES DT307 Red Stucco Tape Silver Duct Tape LMR2 60-Day Red Tape Duct Tape • • Good for Porous Concrete and Rough Surfaces UV Protectors Insure Long Exposure Life • • Aggressive Adhesive Sticks to Almost All Surfaces Good General Utility Tape •...
  • Page 37 BARRIERS EIFS Window/Door Tape Secondary Weather barrier Tape with Fiber Weave back • Recommended for Use with a House Wrap • 30 Mil Thick Composite Membrane: 4” or 9” x 100’ per roll • Prevents Splash-back • Self Adhesive • Should be Used Around Windows, Doors, or Any Structural Opening •...
  • Page 38 DRAINAGE Starter Trac Drip Edge ® Casing bead Windows/Doors • Use at base of wall or around doors & • Window or door drip edge windows • Sloped front edge sheds water •1 ¾” to 3” wide nailing flange available •...
  • Page 39 ACCESS DOORS Universal Access Door Recessed GFRG Door Recessed Stucco & For Plaster & Drywall Plaster Door • #1 selling door • Flush for all surfaces • Door panel recessed 5/8” and lined • For plaster and drywall ceilings • Rounded corners – safe & aesthetic with self-furring galvanized lath •...
  • Page 40 TROWELS Golden Stainless Steel Trowel by Marshalltown ™ • Wood Camel Handle • Golden Stainless Steel Item # Description Price T511M ” x 11” 37.50 T512M 5” x 12” 38.95 T513M 5” x 13” 40.25 T514M 5” x 14” 42.95 T516M 5”...
  • Page 41 DARBIES & TROWELS notched Stainless Steel Trowels • Dura-Soft™ Handle • Accurately Notched to EIFS Manufacturers’ Specifications Notched Trowels • 7 Shapes to Choose From • Highest Quality Stainless Steel Item # Description Price TRNT2 Rounded, 1/4” x 1/4” x 1 ”...
  • Page 42 FLOATS Private Label Program Special Chemical-Resistant Labels that Outlast Printed/Stamped Versions. 24 Available Colors. F600 ABS Float • 5” x 11” 1” x 3” Laminated Label • AbS Plate • Call for More Details Solid-Grip Comfort Textured Handle Minimum Order of 120 Item # Description Mix &...
  • Page 43 FLOATS Stucco Sponge Float ” & 1” Thickness • Ideal for bringing Aggregate to the Surface • The Most Popular for All Stucco Applications • 12” x 5” with Wood Handle Floats: Item # Description Price F125 3/4” Fine Pad 5.95 F130 1”...
  • Page 44 EDGERS T613 T612 T611 T610 T609 Stainless outside Corner Edgers 5 Sizes of Detailed Corner Edgers • Leaves a Professional Clean Edge Item # Description T609 1/2” Stainless OUTSIDE Corner Edge T610 3/4” Stainless OUTSIDE Corner Edge T611 1” Stainless OUTSIDE Corner Edge T612 ”...
  • Page 45 TROWELS T515 T520 T530 T535 Margin Trowels Wood Handles Item # Description Price T515 Margin Trowel, 1 ” x 5” 10.00 T520 Margin Trowel, 2” x 5” 10.50 T530 Margin Trowel, 2” x 6” 11.00 T535 Margin Trowel, 2” x 8” 13.00 KITMT All 4 Sizes in Kit...
  • Page 46 SCOOPS Baltic Scoop Scoop Trowel Tool • Eliminates the Hawk • Scoops an Even Trowel Full Every Time • bucket Hanging Clip for Easy Storage • Galvanized Steel Construction Item # Description Price TBSH7 Baltic Scoop 16.75 Super Scooper • Unique Design Scoops the bucket Clean •...
  • Page 47 HAWKS Hawks Wood or Soft Grip Handle Aluminum with Wood or Soft Grip Handle Magnesium with Wood or Soft Grip Handle Item # Description Price Price Item # Description Price Price TMH13S Magnesium Hawk, 13” x 13” 44.00 44.00 TAH8S Aluminum Hawk, 8”...
  • Page 48 KNIVES & BLADES SOFT GRIPS DC560 Soft Grip Knives Professional Quality ” or 1” blades LC34 Item # Description LC34 3/4” Soft Grip 1” Soft Grip DC560 3/4”Razar Black Tajima Knives Economy breakaways • Available in 3/4” & 1” • Great Quality for Demanding Craftsman •...
  • Page 49 KNIVES & BLADES Olfa Knives breakaways • best breakaway Knives You Can buy! • 2 Sizes: 3/4” & 1” • Distinctive Color Aids Visibility Item # Description Price Olfa 3/4” Heavy Duty Knife 9.45 ™ Olfa 5-Pack Blades, fits L2 & L2HS 5.99 ™...
  • Page 50 MESH MATES Mesh Mates Portable Job Site Mesh Cutters • Accepts All Meshes Up to 48” Wide Mesh Mate 3 • Portable Enough for Scaffolding • Measure Meter Exact to the Inch • Cuts both Vertically and Horizontally • All Cuts are Square •...
  • Page 51 TOOL KITS nEW PRoDUCT Save KITHS KITPVNT Decorative Tool Kit •18 pc Tool Kit for Venetian Plaster, Marmoino, lime and Other Decorative Finishes • Aluminum Case with Two Dividers • Special Steel Welded Tools with Wooden or Sintesi Rubber Handles and Two b-Wires Includes: 3 Finishing Trowels, 2 Plastering Trowels, 4 Venetian Plaster Spatula Set, 2 Putty Knives, 1 Filling Scraper, 1 Tempered Steel Scraper,...
  • Page 52 SIDEWINDER SideWinder ™ Ornamental 4’ Shape Cutter • Cuts Compound Miters, Angle Straight Cuts, Columns, and Decorative Moldings • Uses Your Hardboard Template Patterns to Trace Shapes • Variable Heat Control — Heats Up Extremely Fast • 110 Volts. Also Available in 220 Volts KITSWM •...
  • Page 53 STYROSMITH StyroSmith ™ 2-in-1 Hot Wire Foam Cutter and Ornamental Shaper SideWinder & StyroCut ™ ™ KITSSM • Ornamental Shapes • Vertical & Horizontal Straight Cuts • Channels, Angles, Tapers, Compound Miters, Straight Cuts, Columns, Decorative Moldings, etc. • 110 Volt •...
  • Page 54 QUICKSILVER Quick Silver 12/48 ™ & Quick Silver 12/96 ™ Our Most Versatile Portable Machine • Portable — Weighs Only 60 Pounds • Sets Up and Folds Down in Seconds • Cuts 12” at 90° and Harp Swings 180° for Angle Cuts •...
  • Page 55 BLOCK BUDDY Add Harp at Top Uprights Remove Top Facing the Back of the Brace StyroCut 15 Add Auxiliary Table StyroCut 15 StyroSmith 18” Block Buddy ™ Cornice Cutter TOOL • Shaves, Cuts and Miters • Miters from 0 to 45º •...
  • Page 56 TW848I Top Selling MegaPlot Model C848 CnC Foam Cutter Single Wire 8’ with TurnTable • Cuts Up to 8’ Wide by 4’ High • Industrial Quality • Heavy Duty Extruded Aluminum Construction • Independent Heavy Duty Stepper Motors • ball bearing Drive Track Systems •...
  • Page 57 Columns • Pipe Insulation • Sign Letters • Graphics Store Props & Displays • Logos • Amusement Park Props Architectural Scale Models • Easy Coat Coatings MW848 CnC Foam Cutter 10-Wire 8’ with TurnTable Easy Coat Silver Automatic Foam Coater With or Without Fiber Mesh •...
  • Page 58 FD35 Foam Densifier Fb285 & Fb585 Foam Densifier - Grinder, Storage Hopper & Densifier in one! 1200 lbs* Loose Foam per Hr. TURN YOUR WASTE INTO A PROFITAbLE REVENUE STREAM FD12 FD15 & FD25 Foam Densifier Foam Densifier Figures are approximate depending on foam type, density and rate of feed Waste is Reduced by Grinding and Then Melting Foam Into a Recyclable Patty That is Reduced Up To 90% In Volume •...
  • Page 59 ReCyk EPS Foam Grinder ™ EPS Hot Wire Waste Cuber EPS Waste Grinder • Gravity Fed into 18” x 18” • Standard 110 Volt Hot Wire Grid • Manual Feed Opening of • 3/4” Grid Openings Cut Foam 18.3” x 13.2” •...
  • Page 60 S E r I E S CUTLAS HK5-DUAL OSCILLATING bLADE CNC TYPE INDUSTRIAL CONTROL Dual Oscillating blade CNC is a versatile dual blade machine allowing POWER 13.4 HP, 220V, 60HZ intricate contouring, block sheeting and many other cuts. The HK5 has MACHINE WEIGHT ~6,200 LBS MONITOR...
  • Page 61 CAROUSEL - SLITTTER - DC73 Demand’s Horizontal Carousel Slitter Foam Saw is a high production machine allowing for high-speed continuous operation with minimal manual handling. It is the ideal machine for the production of mattress toppers. Applications: furniture, bedding, automobile, aerospace, packaging & medical industries DIAMETER ~23 FT 11 INCH FOAM SIZE...
  • Page 62 SOFT SAWS Soft Polyurethane Saw Pneumatic Handheld Saw Ultra-Sharp Serrated 23” Single-Edge blade • Designed for Soft Urethane 1/2 Pound Insulation! • Ultra Sharp blade Cuts Quickly • Free Speed of 3,000 RPMs • Requires 8 CFM @ 93 PSI •...
  • Page 63 POLY PLANERS Solid, Tool Hardened Steel All Aluminum blade Provides Excellent Construction Wear Characteristics beveled blade Edge to Guard Helps Keep Provide Positive Cutting Foam Chips Away While Reducing blade Drag From Operator Unless both Start buttons 2 Safety Are Depressed Powerful and blocks to Simultaneously,...
  • Page 64 POLY-SPRAY Poly-Spray 1 System ™ Polyurea Spray Hardcoat Photo Credit: Hardcoat LTD. Cory Porterfield • Environmentally Safe • Contains No VOC’s • Coating is Paintable • Color is Neutral • Dries in 7 Minutes at 70° Compressor requirements: • May be Painted After 7 Minutes Standard 5 hp compressor, with a 20 gallon tank capable •...
  • Page 65 COATINGS 2-PART HAnD-APPLIED HARD SHELL CoATInGS UreShell Liquid Rock ™ ™ 2-Part Urethane 2-Part Epoxy UreShell is a marvelous hard coat Liquid Rock is a 2-part epoxy- 2-part urethane-based coating. 20-25 based coating that can be applied minute working time allows for rolling on interior and exterior surfaces.
  • Page 66 CRAFTERS Foam CraftCutter™ Crafters Precision Hot Knife Rod Style Knife • Continuous Duty Cycle • 1/8” Diameter Stainless Steel Tube • Versatile Sled Guide Accessory CRAFTHD Item # Description HKTPR6 6” Knife with Sled HKTPR9 9” Knife with Sled HKTPR69 6”...
  • Page 67 CRAFTERS Precision Model-Maker ™ 24.5” x 10.4” Table • built-In Power Supply • Variable Heat Settings • 15” Wire Height • 3.3” - 8.2” Wire Height • Weighs 17.6 Pounds • Comes Complete With Angle Guide • Pipe Support • Protractor &...
  • Page 68 1055 Nine North Drive • Alpharetta, GA 30004 USA DEMAND PRODUCTS. CREATING SOLUTIONS FOR THE FOAM INDUSTRY HOT KNIFE CR CutRite ™ ™ PAGE 12 DURARASP ™ PAGE 26 WASHERS ™ PAGE 06 www.demandproducts.com • 1-800-325-7540 USA & Canada...

This manual is also suitable for:

J300 2014

Comments to this Manuals

Symbols: 0
Latest comments: