Siemens SIMATIC IPC627D Operating Instructions Manual page 72

Expanding and assigning parameters to the device
6.4 Drives
5. Remove the cover of the external
drive and the drive bay from the
device.
6. Pull the connector of the SATA
cable from the drive.
7. Loosen the four screws that con-
nect the optical drive with the drive
bay and pull out the optical drive to
the front from the drive bay.
Installing external drive
Proceed in reverse order.
72
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB