drum lifters. Dry the cleaned surfaces
with a soft cloth.
Do not use abrasive
materials or steel wool to
clean the drum.
11.5 Cleaning the control panel
Use a standard neutral soap detergent to
clean the control panel and housing.
You cannot activate the appliance.
The programme does not start.
The appliance door does not close.
The appliance stops during operation.
The cycle time is too long or unsatisfacto‐
ry drying result.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
Do not use furniture cleaning
agents or cleaning agents
which can cause corrosion
to clean the appliance.
11.6 Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
Make sure that the mains plug is connec‐
ted to the mains socket.
Check fuse in fuse box (domestic installa‐
Make sure that the appliance door is
Make sure that the installation of the filter
Make sure that the laundry does not
catch between the appliance door and
the rubber seal.
Make sure that the water container is
empty. Press Start/Pause to start the pro‐
Make sure that the weight of the laundry
is applicable to the duration of the pro‐
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry
in the washing machine again.
Ensure that the room temperature is
higher than +5°C and lower than +35°C.
Optimal room temperature is 19°C to
Set the Time Drying or the Extra Dry pro‐