Factory Setting; How To Turn On The Factory Settings - Panasonic HDC-SD600P Service Manual

10 Factory Setting

10.1. How To Turn On The Factory Settings?

1. Set the mode dial "Motion Picture Recording" mode.
2. Turn the power on, and then while keep pressing the "Zoom lever" to W side, "Intelligent auto/Manual" button and "Menu" but-
ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds "END" is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a
completion of the "FACTORY SETTINGS".
40