Download  Print this page

Setting The Heart Rate Alarm - Philips HeartStart XL Instructions For Use Manual

Monitor/defibrillator.
Hide thumbs

Advertisement

Setting the Heart Rate Alarm

WARNING
WARNING
4-10
Setting the Heart Rate Alarm
The computed heart rate (the number of detected QRS complexes per minute)
is displayed below the
sents the number of QRS complexes detected in a minute. If configured to on,
a QRS beeper identifies each QRS complex detected.
Heart rate displays and alarms function with internal and external pacemakers, but
they can be unreliable. Observe the patient closely if pacemakers are used.
The HR alarm may be configured to alert you when the heart rate is outside
the specified limits. Limit choices are listed in Table 4-4 HR Alarm Limit
Choices.
Table 4-4: HR Alarm Limit Choices
Alarm If Under:
30
60
90
120
To set an HR alarm, cycle through the limit choices by pressing
the desired limits are shown. The
to indicated that the HR alarm is set.
Heart rate alarms are temporarily suspended in AED Mode during ECG analysis or
when
is pressed (for the duration of the paused period). Heart rate alarms are
PAUSE
also suspended while the unit is charging for defibrillation and delivering a shock.
softkey, next to the
HR ALARM
then appears next to the heart rate value
. The heart rate repre-
Or Over:
100
140
160
200
until
HR ALARM
Monitoring the ECG

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • Susan McDonald May 17, 2019 06:34:
    Is it possible to get instructio​ns in French?