Extension Cords; Polarized Plug - Craftsman 125.16821 Operator's Manual

accidental starting, unplug power cord
before changing or cleaning filter.
• Do not leave Wet/Dry Vac unattended
when plugged in. Unplug from outlet
when not in use and before servicing.
• Turn off Wet/Dry Vac before unplugging.
• Do not put any object into ventilation
openings. Do not vacuum with any
ventilation openings blocked; keep free
of dust, lint, hair or anything that may
reduce air flow.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• To reduce the risk of falls, use extra
care when cleaning on stairs.
When using as blower:
• Direct air discharge only at work area.
• Do not use Wet/Dry Vac as a sprayer -
it is not intended to dispense chemicals
such as fertilizer or pesticide.
• Do not direct air at bystanders.
• Keep children away when blowing.
• Wear safety goggles.

Polarized Plug

To reduce the risk of electrical shock, this
appliance has a polarized plug (with one
blade wider than the other). This plug will
fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any
way. Double insulation
need for the three wire grounded power
cord and grounded power supply system.

Extension Cords

When using an extension cord with your Wet/Dry Vac refer to the following table
to determine the required A.W.G. (American Wire Gauge) wire size. Before using
Wet/Dry Vac, make sure it is in good working condition, including power cord.
Also, make sure extension cord is in good working condition prior to use. Make
repairs or replacements before using the vacuum cleaner. Only use extension cords
that are rated for outdoor use.
110V-120V
Amps
0-6
7-10
11-12
13-16
eliminates the
25 Feet
7.5 Meters 15.25 Meters
18
18
16
14
Observe the following warnings that
appear on the motor housing of your Vac:
DOUBLE INSULATED
GROUNDING NOT REQUIRED.
WHEN SERVICING USE ONLY
IDENTICAL REPLACEMENT PARTS.
• For your own safety, read and
understand owner's manual.
• Do not allow unit to be in
operation if unattended.
• Do not pick up hot ashes,
coals, toxic, flammable, or other
hazardous materials.
• Do not use around explosive
liquids or vapors.
WARNING: To reduce the risk of
electric shock - do not expose to rain
- store indoors.
WARNING: When using as a
blower:
Wear safety goggles labeled "ANSI
Z87.1" (Canada CSA Z94.3) on the
package. Turn unit off before setting
on ground or releasing grasp of
handle. Electric shock could occur
if used on wet surfaces. Direct tool
discharge only at work area. Do not
direct discharge at bystanders. Keep
children away.
Length of Extension Cord
50 Feet 100 Feet
30.5 Meters
A.W.G. Wire Size
16
16
16
12
3
WARNING
150 Feet
45.7 Meters
16
14
14
Not recommended
14
12
12