Download  Print this page

How To Enter The Service Factory Mode - Pioneer PDP-503PC Service Manual

Hide thumbs

Advertisement

5

6.1.1 How to Enter the Service Factory Mode

System standby state
Confirm that the plasma display and the media receiver turned on together and a
system cable is connected properly.
Service Factory Mode
Page 1/13
General information of the Plasma Display and Media Receiver
Page 2/13 to 9/13
Adjustment and setting item of the Media Receiver
Page 11/13 to 13/13
Adjustment and setting item of the Plasma Display
Note 1: When use the adjustment exclusive use remote control unit with a [AA5F] code.
: Be careful so that there is the case that page constitution is different.
5
6
Press the "
Perform the following operation by the remote control unit for less than 3 seconds.
• Press the "MENU" key
• Press the "ENTER" key
• Press the "0" key
Press the "Factory" key (Note 1)
Image receiving state
Press the "Factory" key (Note 1)
PDP-503PC
6
7
(POWER)" key (POWER OFF)
Switch a page
with "5" and "∞" keys.
7
8
A
B
C
D
E
F
57
8

Advertisement

Table of Contents

   Related Manuals for Pioneer PDP-503PC

Comments to this Manuals

Symbols: 0
Latest comments: